Miele G4510 Problem Possible fault Solution Dishes are not dry, Cutlery are, Spotted, Wiped off

Page 38

Frequently asked questions

Problem

Possible fault

Solution

Dishes are not dry,

The rinse aid setting may be

Increase the dosage, refill

glasses and

too low, or the rinse aid

the reservoir or switch the

cutlery are

reservoir is empty.

rinse aid product when

spotted.

 

refilling (see "Rinse aid").

 

Dishes were taken out too

Leave dishes in longer (see

 

soon.

"Use").

 

A "Tab" product was used.

Change the detergent, or

 

These products have a low

refill the rinse aid (see "Rinse

 

drying effect.

aid").

White residue is

Not enough rinse aid was

Increase the dosage (see

visible on cutlery

used.

"Setting the rinse aid

and dishes.

 

dosage").

Clouding occurs

The salt container is empty.

Refill the salt container (see

on glassware and

 

"Filling the salt container").

cutlery; film can be

 

The salt container lid was not

Reseat it making sure it

wiped off.

correctly screwed on.

screws back on correctly.

 

 

Unsuitable "Tab" products

Use a different detergent.

 

were used.

Use normal (powder or gel)

 

 

detergent.

 

The water softener is

Program a higher water

 

programmed on too low a

softener setting (see "Water

 

setting.

softener").

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operating Instructions Dishwasher 4510 Important Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Disposal of the packing material Caring for the environmentEnergy saving washing Disposal of an old machineTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener ExampleFilling the salt container Refill salt message Rinse aid Adding rinse aidRhythm Adjusting the dosageRinse aid Flashing Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Adjustable cup rack Upper basketAdjusting the upper basket Lower basket Foldable spikesInserting Comfort insertRemoving Cutlery tray Optional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning onSelecting a program Program sequence displayProgram When to use Program sequence Guide Program GuidePreparing your appliance for an extended vacation StandbyAt the end of a program Interrupting a program Changing a programFactory default Additional optionsFrequently asked questions Technical faultsIndicator flashes Problems water Intake / DrainProblem Possible fault Solution Intake / Drain Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Clean Poor cleaning resultsProblem Possible fault Solution Dishes are not GlassesSpotted Problem Possible fault Solution Dishes are not dryCutlery are White residue isDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareUser Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Electrical connection Grounding InstructionsPlumbing Plumbing Drainage Venting the drainage systemGeneral requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Alteration rights reserved Nr 510 261 G4510
Top Page Image Contents