Before using for the first time
Programming the water softener
To exit the programming mode at any time, turn the dishwasher off with the "" button.
Turn the dishwasher off with "".
Press and hold the program and "Start / Stop" button simultaneously turn the dishwasher on with "". Hold the "Start / Stop" button in until the "Start / Stop indicator lights.
If it does not come on, start over.
Press the "Delay Start" button twice.
The "Delay Start" indicator flashes twice in intervals and the program sequence indicator "Rinse" flashes once in intervals (factory default).
The amount set can be recognized by the flashing rhythm of the "Rinse" indicator (see table):
| °d |
| gr/gal | Flashing rhythm | |
|
|
|
|
|
|
1 | - | 4 | 1 | - 4 | once |
|
|
|
|
|
|
5 | - | 7 | 5 | - 7 | twice |
|
|
|
| ||
8 | - 11 | 8 - 11 | 3 times | ||
|
|
|
| ||
12 - 15 | 13 | - 16 | 4 times | ||
|
|
|
| ||
16 - 20 | 17 | - 21 | 5 times | ||
|
|
|
| ||
21 - 25 | 22 | - 26 | 6 times | ||
|
|
| |||
26 - 30 | 27 - 31 | 7 times | |||
|
|
|
| ||
31 - 36 | 32 | - 38 | 8 times | ||
|
|
|
| ||
37 - 45 | 39 | - 47 | 9 times | ||
|
|
|
| ||
46 - 70 | 48 | - 73 | 1 long flash | ||
|
|
|
|
|
|
Select the desired setting with the "Start / Stop" button. Every touch of the button increases the level.
The programmed dosage is saved.
Turn the dishwasher off "".
Checking the programmed water hardness level
Turn the dishwasher off "".
Press the "Start / Stop" button, at the same time turn the dishwasher on "".
Hold the "Start / Stop" button in until the indicator comes on.
Press the "Delay Start" button twice.
The "Rinse" indicator flashes in the rhythm which corresponds to the adjusted water hardness.
Turn the dishwasher off "".
12