Miele G 2143 Issue Possible fault Solution Dishes are still wet, Glasses and cutlery are, Spotted

Page 38

Frequently asked questions

	Issue	Possible fault	Solution

	Dishes are still wet,	The rinse aid setting may	Increase the dosage, refill
	glasses and cutlery are	be too low, or the rinse	the reservoir or switch the
	spotted.	aid reservoir is empty.	rinse aid product when
			refilling, see "Before using
			for the first time".

		Dishes were taken out too	Leave dishes in longer,
		soon.	see "Use".

		A "Tab" product was	Use a normal (powder or
		used. These products	gel) detergent and add
		have a low drying effect.	rinse aid.

	White residue is visible	Not enough rinse aid was	Increase the dosage, see
	on cutlery and dishes.	used.	"Before using for the first
	Clouding occurs on		time".
	glassware and film can
	glassware and film can	A "Tab" product was	Use a normal (gel or
	be wiped off.	A "Tab" product was	Use a normal (gel or
	be wiped off.	used.	powder) detergent.
		used.	powder) detergent.

		The salt container is	Refill the salt container,
		empty.	see "Before using for the
			first time".

		The salt container lid was	Reseat it making sure it
		not correctly screwed on.	screws back on correctly.

38

Image 38

Contents Operating Instructions Dishwasher 2143 BeforeContents Additional options Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Child Safety Lock Water softener Programming the water softener Checking the programmed water hardness levelSalt indicator Filling the salt containerAdding rinse aid Rinse aid indicatorRinse aid Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Cup racks Upper basketCoffee bar Adjusting the upper basket Lower basket Foldable spikesReplacing the insert Removable spike insertRemoving the insert Removable PlateGuard Plus with StemGuardVase / Bottle insert Basket accessories Use DetergentAdding detergent Program sequence display Turning onSelecting and starting a program Program guide UsageAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programTurbo Default settingsAdditional options Starting a program before the delay start has elapsed Delay StartDelay start display Frequently asked questions Technical faultsIndicator flashes Problems water Intake / DrainIssue Possible fault Solution Intake / Drain Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Poor cleaning results Spotted Issue Possible fault Solution Dishes are still wetGlasses and cutlery are White residue is visibleOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullComparison Tests Comparison Tests Repairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Electrical connection Grounding InstructionsConnection to the water supply PlumbingWaterproof system Drainage Venting the drainage systemPage Page Page Alteration rights reserved Nr 724 060 2143