Before using for the first time
Adjusting the dosage
The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6.
–Use a higher setting if spots appear on dry glassware.
–Use a lower setting if streaking appears on dishes or glasses.
Turn the dishwasher off "".
Press and hold the "Start / Stop" button and at the same time turn the dishwasher on "". Hold the "Start / Stop" button until the "Start / Stop" indicator comes on.
If it does not come on, start over.
Press the "Delay Start" button three times.
The "Rinse & Hold" indicator flashes 3 times in intervals.
The rinse aid dosage is adjusted to 3 ml by default.
The amount set can be recognized by the flashing rhythm of the "Rinse" indicator (see table):
Dosage in ml | Flashing rhythm |
| "Rinse" |
|
|
0 | - |
|
|
1 | Once |
|
|
2 | Twice |
3 | 3 times |
|
|
4 | 4 times |
|
|
5 | 5 times |
|
|
6 | 6 times |
Select the desired setting with the "Start / Stop" button. Every touch of the button increases the level.
The programmed dosage is saved.
Turn the dishwasher off "".
15