Additional options
Turbo
The "Turbo" function can be used to reduce the program
Turn the dishwasher on "". The "Start / Stop" indicator flashes.
Press the "Turbo" button.
The "Turbo" indicator lights up.
The option will remain active for all programs until the setting is changed again.
A program can now be started as usual or the dishwasher can be turned off "".
Default settings
All settings can be reset to the factory default.
Turn the dishwasher off "".
Press and hold the "Start / Stop" button and at the same time turn the dishwasher on "". Hold the "Start / Stop" button until the indicator lights up.
If it does not come on, start over.
Press the "Delay Start" button 12 times.
The "Rinse & Hold" indicator gives one long flash and two short flashes in intervals.
The "Rinse" indicator lights up showing that a setting other than the factory default has been set.
–If the "Rinse" indicator light is flashing:
All settings are factory default.
–If the "Rinse" indicator is not lit up: At least one setting has been altered from the factory defaults
To reset the dishwasher to the factory default settings, press the "Start / Stop" button.
The setting is saved.
Turn the dishwasher off "".
31