Miele G 2143 manual Frequently asked questions, Technical faults

Page 33

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

	Issue	Possible fault	Solution
	The Start / Stop	The machine is not	Insert the plug.
	indicator does not flash	plugged in.
	after the dishwasher is	The fuse has tripped.	Reset the circuit breaker.
	turned on with "".	The fuse has tripped.	Reset the circuit breaker.
	turned on with "".		See data plate for
			See data plate for
			minimum amperage.
	The dishwasher stops	The fuse has tripped.	Reset the circuit breaker.
	during a program.		See data plate for
			minimum amperage.
	The program cycle	There may be a technical	–	Turn the dishwasher off
	indicators "Rinse",	fault.		"".
	"Drying" and "End"		After a few seconds:
	flash at the same time.		–	Turn the dishwasher on
			–	Turn the dishwasher on
				"".
			–	Select the desired
				program with the
				"Program" button.
			–	Press the "Start / Stop"
				button.
			If the problem persists,
			contact Technical
			Service.
	The drain pump is	The waterproof system	– Turn off the water
	running when the door	has activated.		supply.
	is open.		–	Contact Miele
				Technical Service.

33

Image 33

Contents Before Operating Instructions Dishwasher 2143Contents Additional options Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the door Child Safety LockTo close the door Water softener Checking the programmed water hardness level Programming the water softenerFilling the salt container Salt indicatorRinse aid indicator Rinse aidAdding rinse aid Adjusting the dosage Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Cutlery tray Upper basket Coffee barCup racks Adjusting the upper basket Foldable spikes Lower basketRemoving the insert Removable spike insertReplacing the insert Removable PlateGuard Plus with StemGuardVase / Bottle insert Basket accessories Detergent UseAdding detergent Turning on Selecting and starting a programProgram sequence display Usage Program guidePreparing your appliance for an extended vacaion At the end of a programChanging a program Interrupting a programDefault settings Additional optionsTurbo Delay Start Delay start displayStarting a program before the delay start has elapsed Technical faults Frequently asked questionsIssue Possible fault Solution Intake / Drain Problems water Intake / DrainIndicator flashes Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Poor cleaning results Glasses and cutlery are Issue Possible fault Solution Dishes are still wetSpotted White residue is visibleDiscolored Film cannot be wiped Off Clouding or etching Issue Possible fault Solution Glasses areOn glasses Glasses are dullComparison Tests Comparison Tests PC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionPlumbing Waterproof systemConnection to the water supply Venting the drainage system DrainagePage Page Page Alteration rights reserved Nr 724 060 2143