Miele G 2143 manual Poor cleaning results

Page 37

Frequently asked questions

Poor cleaning results

Issue	Possible fault	Solution
The dishes are not	The dishes were not loaded	See "Loading the
clean.	correctly.	dishwasher".
	The program was not	Select a more intensive
	powerful enough.	program, see "Program
		Guide".
	Not enough detergent was	Use more detergent, see
	dispensed.	"Adding detergent".
	The spray arms are blocked	Turn the spray arm and
	by items.	rearrange the dishes if
		necessary.
	The triple filter in the base of	Clean the filter and insert it
	the wash cabinet is not clean	correctly.
	or not correctly inserted. The	Clean the spray arm jets.
	spray arm jets might be	See "User Maintenance
	clogged.	Instructions".
	The drain pump or the	Clean the drain pump and
	non-return valve is blocked.	the non-return valve, see
	Wash water will run back into	maintenance instructions.
	the wash cabinet.
Glasses and	The rinse aid dosage is set	Reduce the dosage, see
cutlery show	too high.	"Before using for the first
streaks. There is a		time".
bluish sheen on
the surface of
glasses and a film
that can be wiped
off.

37

Image 37

Contents Before Operating Instructions Dishwasher 2143Contents Additional options Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo open the door Child Safety Lock Before using for the first timeTo close the door Water softener Checking the programmed water hardness level Programming the water softenerFilling the salt container Salt indicatorRinse aid Rinse aid indicatorAdding rinse aid Adjusting the dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Cutlery tray Coffee bar Upper basketCup racks Adjusting the upper basket Foldable spikes Lower basketRemoving the insert Removable spike insertReplacing the insert Removable PlateGuard Plus with StemGuardVase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting and starting a program Turning onProgram sequence display Usage Program guidePreparing your appliance for an extended vacaion At the end of a programChanging a program Interrupting a programAdditional options Default settingsTurbo Delay start display Delay StartStarting a program before the delay start has elapsed Technical faults Frequently asked questionsIssue Possible fault Solution Intake / Drain Problems water Intake / DrainIndicator flashes Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Poor cleaning results Glasses and cutlery are Issue Possible fault Solution Dishes are still wetSpotted White residue is visibleDiscolored Film cannot be wiped Off Clouding or etching Issue Possible fault Solution Glasses areOn glasses Glasses are dullComparison Tests Comparison Tests PC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Grounding Instructions Electrical connectionWaterproof system PlumbingConnection to the water supply Venting the drainage system DrainagePage Page Page Alteration rights reserved Nr 724 060 2143