Miele G 2143 Problems water Intake / Drain, Issue Possible fault Solution Intake / Drain, Running

Page 34

Frequently asked questions

Problems water Intake / Drain

	Issue	Possible fault	Solution

	The "Intake / Drain"	The water supply is	Open the water supply all
	indicator flashes.	closed.	the way.

	The dishwasher stops		Before fixing the fault:
	running.		–	Turn the dishwasher off
	The "Intake / Drain"			"".
	indicator flashes.
	indicator flashes.	Water intake fault.	– Open the water supply
		Water intake fault.	– Open the water supply
				all the way.
			–	Clean the water intake
				filter, see "User
				Maintenance
				Instructions".
			–	The water pressure at
				the water connection is
				lower than 4.35 psi.
				Consult a plumber.

		Water drain fault.	– Clean the triple filter.
		There may be water in the	– Clean the drain pump
		wash cabinet.		and the non-return
				valve.
			See "User Maintenance
			Instructions" for more
			information on the above.
			–	Remove any kinks in
				the drain hose.

34

Image 34

Contents Operating Instructions Dishwasher 2143 BeforeContents Additional options Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Child Safety Lock Before using for the first timeTo close the door Water softener Programming the water softener Checking the programmed water hardness levelSalt indicator Filling the salt containerRinse aid Rinse aid indicatorAdding rinse aid Adjusting the dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Cutlery tray Coffee bar Upper basketCup racks Adjusting the upper basket Lower basket Foldable spikesReplacing the insert Removable spike insertRemoving the insert Removable PlateGuard Plus with StemGuardVase / Bottle insert Basket accessories Use DetergentAdding detergent Selecting and starting a program Turning onProgram sequence display Program guide UsageAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programAdditional options Default settingsTurbo Delay start display Delay StartStarting a program before the delay start has elapsed Frequently asked questions Technical faultsIndicator flashes Problems water Intake / DrainIssue Possible fault Solution Intake / Drain Intake / Drain Indicator flashesGeneral problems with the dishwasher Sounds Poor cleaning results Spotted Issue Possible fault Solution Dishes are still wetGlasses and cutlery are White residue is visibleOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullComparison Tests Comparison Tests Repairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Electrical connection Grounding InstructionsWaterproof system PlumbingConnection to the water supply Drainage Venting the drainage systemPage Page Page Alteration rights reserved Nr 724 060 2143