Miele G 5105, G 5100 manual Water softener

Page 11

Before using for the first time

Water softener

To achieve good cleaning results, the dishwasher needs soft water (water that is low in minerals). Hard water results in calcium deposits on dishware and in the dishwasher.

If your tap water hardness is above 4 °d (4 gr/gal) the water should be softened. The built-in water softener is designed for this purpose. The water softener is suitable for a water hardness up to

70 °d (73 gr/gal).

–If using "Tab" detergent products you do not need to add salt, depending on the water hardness 22 gr/gal (21 °d) (see "Detergents").

–The dishwasher must be correctly programmed to match the hardness of your water.

–Your local water authority will be able to advise you of the exact water hardness level in your area.

If the hardness of your local supply is constantly lower than 4 °d (4 gr/gal), you do not need to add water softener salt. However the water hardness level must still be programmed.

In areas where the water hardness fluctuates (e.g. 37-50 °d [39-52 gr/gal]) always program the machine to the higher value (in this example 50 °d [52 gr/gal]).

If there is a fault, it will help the service technician to know the hardness of your local water supply.

Please note your water hardness below:

°d (gr/gal)

The water hardness was programmed at 1 °d (1 gr/gal) by factory default.

11

Image 11

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance Use Guide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Upper basket Adjustable cup rackAdjusting the upper basket Lower basket Glass rack Removable MultiComfort insertTo remove the insert To replace the insertFoldable spikes Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent UseStarting a program Progress indicatorTurning on Selecting a programProgram Guide Program When to use Program sequence GuidePreparing your appliance for an extended vacation StandbyAt the end of a program Turning offChanging a program Unloading the dishwasherInterrupting a program Turbo Delay startAdditional options Starting a program before the Delay start has elapsed Delay start displayOptimize Standby Factory default Technical faults Frequently asked questionsProblems water Intake / Drain General problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 016 310 G5100/G5105