Miele G 5100, G 5105 Poor cleaning results, Problem Possible fault Solution Dishes are not, Clean

Page 46

Frequently asked questions

Poor cleaning results

Problem	Possible fault	Solution
The dishes are not	The dishes were not loaded	See "Loading the
clean.	correctly.	dishwasher".
	The program was not	Select a more intensive
	powerful enough.	program (see "Program
		Guide").
	Stubborn but normal soiling	Use the function "Adjust
	(e.g. coffee, tea).	Sensor Wash" (depending
		on model) (See "Additional
		Options").
	Not enough detergent was	Use more detergent, or
	dispensed.	change the detergent.
	The spray arms are blocked.	Turn the spray arms and
		rearrange the dishes if
		necessary.
	The triple filter in the wash	Clean the filter and insert it
	cabinet is clogged or not	correctly.
	correctly inserted.	Clean the spray arm jets, if
	The spray arm jets might be	required (see "Cleaning and
	clogged as a result.	care").
	The non-return valve is stuck	Clean the drain pump and
	open and blocked. Wash	the non-return valve (see
	water will run back into the	"Cleaning and care").
	wash cabinet.
Glasses and	The rinse aid dosage is set	Reduce the dosage (see
cutlery show	too high.	"Rinse aid").
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.

46

Image 46

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Child safety lock Before using for the first timeTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Adjustable cup rack Upper basketAdjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentUse Adding detergentSelecting a program Progress indicatorTurning on Starting a programProgram When to use Program sequence Guide Program GuideTurning off StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Unloading the dishwasherChanging a program Additional options Delay startTurbo Delay start display Starting a program before the Delay start has elapsedOptimize Standby Factory default Frequently asked questions Technical faultsProblems water Intake / Drain General problems with the dishwasher Sounds Clean Poor cleaning resultsProblem Possible fault Solution Dishes are not GlassesSpotted Problem Possible fault Solution Dishes are not dryCutlery are White residue isDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 016 310 G5100/G5105