Miele G 5100, G 5105 manual Frequently asked questions, Technical faults

Page 42

Frequently asked questions

￿Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Problem

Possible fault

Solution

The Start / Stop

The machine is not

Insert the plug.

indicator does not flash

plugged in.

 

 

after the dishwasher is

The fuse has tripped.

Reset the circuit breaker.

turned on with "￿".

 

See data plate for

 

 

 

 

minimum amperage.

The dishwasher stops

The fuse has tripped.

Reset the circuit breaker.

during a program.

 

See data plate for

 

 

minimum amperage.

The program cycle

There may be a technical

–

Turn the dishwasher off

indicators "Cleaning",

fault.

 

"￿".

"Drying" and "End"

 

After a few seconds:

flash at the same time.

 

–

Turn the dishwasher on

Fault code FXX appears

 

 

 

"￿".

in the time display.

 

 

 

–

Select the desired

 

 

 

 

 

program with the

 

 

 

"Program" button.

 

 

–

Press the "Start / Stop"

 

 

 

button.

 

 

If the problem persists,

 

 

contact Technical Ser-

 

 

vice.

The drain pump is

Fault F70:

– Turn off the water

running when the door

The waterproof system

 

supply.

is open.

has activated.

–

Contact Miele

 

 

 

Technical Service.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents
Operating Instructions Dishwasher 5100 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the door Child safety lockTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Adjustable cup rack Upper basketAdjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentUse Adding detergentSelecting a program Progress indicatorTurning on Starting a programProgram When to use Program sequence Guide Program GuideTurning off StandbyAt the end of a program Preparing your appliance for an extended vacationUnloading the dishwasher Interrupting a programChanging a program Delay start Additional options Turbo Delay start display Starting a program before the Delay start has elapsedOptimize Standby Factory default Frequently asked questions Technical faultsProblems water Intake / Drain General problems with the dishwasher Sounds Clean Poor cleaning resultsProblem Possible fault Solution Dishes are not GlassesSpotted Problem Possible fault Solution Dishes are not dryCutlery are White residue isDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 016 310 G5100/G5105
Top Page Image Contents