Miele G 5105, G 5100 manual Rinse aid, Adding rinse aid

Page 17

Before using for the first time

Rinse aid

Rinse aid is needed to prevent spotting on dishes and glassware.

The rinse aid is filled in the reservoir and the set amount will be automatically dosed.

Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir.

When using "Tab" detergents rinse aid is not needed.

Adding rinse aid

Press the button in the direction of the arrow until the flap springs open.

Pour liquid rinse aid into the reservoir until it its visible on the surface of the screen.

The rinse aid reservoir holds approx. 3.7 oz (110 ml).

Press on the flap until you hear it click shut. Failure to close it all the way allows water to enter the reservoir during the wash program.

Clean any spilled rinse aid. The flap will remain closed during normal operation.

17

Image 17

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Upper basket Adjustable cup rackAdjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent UseTurning on Progress indicatorSelecting a program Starting a programProgram Guide Program When to use Program sequence GuideAt the end of a program StandbyTurning off Preparing your appliance for an extended vacationChanging a program Unloading the dishwasherInterrupting a program Turbo Delay startAdditional options Starting a program before the Delay start has elapsed Delay start displayOptimize Standby Factory default Technical faults Frequently asked questionsProblems water Intake / Drain General problems with the dishwasher Sounds Problem Possible fault Solution Dishes are not Poor cleaning resultsClean GlassesCutlery are Problem Possible fault Solution Dishes are not drySpotted White residue isBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 016 310 G5100/G5105