Miele G 5100, G 5105 manual Turning on, Selecting a program, Starting a program, Progress indicator

Page 34

Use

Turning on

Make sure the spray arms can rotate freely.

Close the door.

Open the water supply, if it is closed.

Press the button to turn the dishwasher on.

The "Start/Stop" indicator light flashes and the indicator of the last set program lights up.

Selecting a program

Choose your program according to the type of load and soiling.

See the "Program Guide" for more information.

Select the desired program with the Program selection button.

The indicator light for the selected program will come on.

You can now select the additional options (see "Additional Options").

Starting a program

Press the "Start/Stop" button.

The program starts. The "Start/Stop", "Cleaning" indicators and the indicator of the selected program come on.

If additional options are selected, the corresponding indicators will also light up.

Cancel a program only in the first few minutes.

Otherwise important program steps (e.g. the water softening) may be interrupted.

Progress indicator

After starting a program, the progress indicator will show the current program section.

34

Image 34

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Child safety lock Before using for the first timeTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Adjustable cup rack Upper basketAdjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentUse Adding detergentSelecting a program Progress indicatorTurning on Starting a programProgram When to use Program sequence Guide Program GuideTurning off StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Unloading the dishwasherChanging a program Additional options Delay startTurbo Delay start display Starting a program before the Delay start has elapsedOptimize Standby Factory default Frequently asked questions Technical faultsProblems water Intake / Drain General problems with the dishwasher Sounds Clean Poor cleaning resultsProblem Possible fault Solution Dishes are not GlassesSpotted Problem Possible fault Solution Dishes are not dryCutlery are White residue isDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 016 310 G5100/G5105