Miele G 5105, G 5100 manual Triple filter system

Page 53

Cleaning and Care

Triple filter system

The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones). During normal use, the filter system is self-cleaning.

The machine must not be used without all the filters in place!

Check and clean the filter system periodically for any trapped or foreign objects.

The level of soiling and time it takes before the filters need cleaning will vary depending on your household usage.

Turn off the dishwasher before cleaning.

Turn the handle counterclockwise to release the triple filter system .

Lift the filter combination out of the machine . Remove any solid particles and rinse under running water. Scrub with a nylon brush if necessary.

53

Image 53

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Upper basket Adjustable cup rackAdjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent UseTurning on Progress indicatorSelecting a program Starting a programProgram Guide Program When to use Program sequence GuideAt the end of a program StandbyTurning off Preparing your appliance for an extended vacationChanging a program Unloading the dishwasherInterrupting a program Turbo Delay startAdditional options Starting a program before the Delay start has elapsed Delay start displayOptimize Standby Factory default Technical faults Frequently asked questionsProblems water Intake / Drain General problems with the dishwasher Sounds Problem Possible fault Solution Dishes are not Poor cleaning resultsClean GlassesCutlery are Problem Possible fault Solution Dishes are not drySpotted White residue isBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored film PC Update After sales service Repairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 016 310 G5100/G5105