Miele G 5105, G 5100 manual Factory default

Page 41

Additional options

Factory default

All settings can be reset to factory default.

Press the button to turn the dishwasher off.

Press and hold the "Start / Stop" button and turn the dishwasher on simultaneously using the button. Keep the Start/Stop button pressed for at least four seconds until the "Start / Stop" indicator light comes on.

If it does not come on, start over.

Press the "Delay start" button 12 times.

The "Delay Start" indicator will give one long flash and two brief flashes in intervals.

The flashing sequence in the display shows what the current setting is.

–"P 1": All setting are set to factory default settings.

–"P 0": At least one setting has been changed.

Press the "Start / Stop" button if you wish to reset the dishwasher to the default settings.

The setting is saved immediately.

Press the button to turn the dishwasher off.

41

Image 41

Contents

Operating Instructions Dishwasher 5100 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child safety lock Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Upper basket Adjustable cup rackAdjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent UseTurning on Progress indicatorSelecting a program Starting a programProgram Guide Program When to use Program sequence GuideAt the end of a program StandbyTurning off Preparing your appliance for an extended vacation Changing a program Unloading the dishwasher Interrupting a program Turbo Delay startAdditional options Starting a program before the Delay start has elapsed Delay start displayOptimize Standby Factory default Technical faults Frequently asked questionsProblems water Intake / Drain General problems with the dishwasher Sounds Problem Possible fault Solution Dishes are not Poor cleaning resultsClean GlassesCutlery are Problem Possible fault Solution Dishes are not drySpotted White residue isBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 016 310 G5100/G5105