Miele CVA 615 operating instructions Setting the standby timer

Page 19

Programming

Setting the standby timer

To help create a more energy efficient coffee system the machine can be set to power down after a programmed time period.

The standby time can be set in

15 minute increments up to 3 hours.

The time is measured from the last time a drink was dispensed.

^Turn the program selector counterclockwise to "Program mode".

^Press the e button to highlight "TIMER" with an asterisk.

^Press ENTER to select this option.

The sub-menu will appear in the message window.

^Press the e or - button to select the required length of time. The time can be set in 15 minute increments.

^Press ENTER to save this setting, or turn the program selector to "0ff" to cancel if a mistake has been made.

If the rinse feature is set to "On" and a drink was already dispensed, the system will be rinsed automatically before going into standby.

19

Image 19

Contents Operating instructions Coffee System CVA Contents Rinsing cycle Electrical safety Important Safety InstructionsInstallation Use Save These InstructionsGuide to the coffee system Guide to the coffee system Programming Program modeChoosing a language Rinsing feature Determining the water hardness Setting the water hardness Setting the drink temperatures Pre-brewing feature Pre-grinding feature Hot water feature Total coffee counter Setting the standby timer Activating the system lock System lockDeactivating the system lock Before using the coffee system Filling the water tank Water tankOpen the front of the machine Filling the coffee bean container Coffee bean containerAdjusting the coffee dispensers Setting the serving sizesCoffee and espresso Hot water Pre-warming cups Making coffeePre-warming Pre-warming the systemEspresso or coffee Canceling preparationPreparing two cups simultaneously Cappuccino Making coffee Dispensing hot water Adjusting the coffee grinder Setting the coffee grinderTo adjust the grinder setting To adjust the quantity setting Setting the quantityDaily care Coffee system careStainless steel colored controls Wipe up any spills of descaling solution immediatelyExterior Stainless steelDrip catch Steam valve Waste unitLift the waste unit up and out Brew unit After cleaning press PressRemove the waste unit Rinsing cycle Degreasing the brew unitCleaning the brew unit filters Lubricating the brew unit Remove the brew unit Resetting the brew unit’s basic Change the gaskets position Open the appliance door Changing the light bulbAutomatic descaling Descaling the applianceOnly use the enclosed descaling tablets for descaling Descaling the appliance Descaling the appliance Message Possible fault Fix Fault messagesFrequently asked questions Slowly? Coffee is not What if Possible fault Fix Espresso isDispensed too Quickly?Slide won’t move? What if Possible fault Fix No water runs outGrinder setting Dispensers? There is no crema?Frequently asked questions After sales service Installation instructions Disposal of packing material Caring for the environmentDisposal of an old appliance This Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation Installation Coffee glossary Alteration rights reserved / 44 / USA/CDN