Miele CVA 615 operating instructions Rinsing cycle Degreasing the brew unit, Remove the waste unit

Page 39

Coffee system care

Rinsing cycle:

Degreasing the brew unit

The natural oil found in coffee can cause the brew unit to clog. The message "Rinsing cycle" will flash in the message window after 500 cups to remind you to clean the unit with the enclosed detergent tablets. These cleaning tablets can be purchased from your Miele dealer or the Miele Technical Service Department.

^ Remove the waste unit.

^Take out the brew unit and put the detergent tablet in the brew unit funnel.

^Return the brew unit and waste unit to the appliance and close the door.

^Set a 3 cup (25 oz) container under the coffee dispensers.

The display will read:

^Press e, to select "Rinsing cycle" with the asterisk.

^Press ENTER.

The display will read:

A small amount of water will flow out of the coffee dispensers. After a pause more water will flow out. This process will run 4 times, dispensing 2 cups (17 oz) of hot water. The whole process will take about 5 minutes.

^At the end of the cleaning cycle the display will read:

^Press the rinse/pre-warm button e. (The unit must be pre-heated and ready to use otherwise the button will not respond.)

The brew unit is now clean and ready to use.

39

Image 39
Contents Operating instructions Coffee System CVA Contents Rinsing cycle Electrical safety Important Safety InstructionsInstallation Use Save These InstructionsGuide to the coffee system Guide to the coffee system Programming Program modeChoosing a language Rinsing feature Determining the water hardness Setting the water hardness Setting the drink temperatures Pre-brewing feature Pre-grinding feature Hot water feature Total coffee counter Setting the standby timer System lock Activating the system lockDeactivating the system lock Before using the coffee system Water tank Filling the water tankOpen the front of the machine Filling the coffee bean container Coffee bean containerAdjusting the coffee dispensers Setting the serving sizesCoffee and espresso Hot water Pre-warming cups Making coffeePre-warming Pre-warming the systemCanceling preparation Espresso or coffeePreparing two cups simultaneously Cappuccino Making coffee Dispensing hot water Setting the coffee grinder Adjusting the coffee grinderTo adjust the grinder setting To adjust the quantity setting Setting the quantityDaily care Coffee system careStainless steel colored controls Wipe up any spills of descaling solution immediatelyExterior Stainless steelDrip catch Waste unit Steam valveLift the waste unit up and out Brew unit After cleaning press PressRemove the waste unit Rinsing cycle Degreasing the brew unitCleaning the brew unit filters Lubricating the brew unit Remove the brew unit Resetting the brew unit’s basic Change the gaskets position Open the appliance door Changing the light bulbDescaling the appliance Automatic descalingOnly use the enclosed descaling tablets for descaling Descaling the appliance Descaling the appliance Message Possible fault Fix Fault messagesFrequently asked questions Slowly? Coffee is not What if Possible fault Fix Espresso isDispensed too Quickly?Slide won’t move? What if Possible fault Fix No water runs outGrinder setting Dispensers? There is no crema?Frequently asked questions After sales service Installation instructions Caring for the environment Disposal of packing materialDisposal of an old appliance This Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation Installation Coffee glossary Alteration rights reserved / 44 / USA/CDN