Miele CVA 615 operating instructions Electrical connection, This Appliance Must be Grounded

Page 55

Electrical connection

All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations.

Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.

Ensure that power is not supplied to the appliance while installation or maintenance work is performed.

Verify that the voltage, load and circuit rating information found on the data plate, match the household electrical supply before installing the coffee system.

If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department.

U1-800-999-1360

V1-800-565-6435

WARNING:

THIS APPLIANCE MUST BE GROUNDED

Important

The coffee system comes equipped with a 6 ft (1.8 m) power cord with a NEMA 5-15P molded plug for connection to a 120 V, 15 A, 60 Hz power supply.

55

Image 55

Contents Operating instructions Coffee System CVA Contents Rinsing cycle Electrical safety Important Safety InstructionsInstallation Use Save These InstructionsGuide to the coffee system Guide to the coffee system Programming Program modeChoosing a language Rinsing feature Determining the water hardness Setting the water hardness Setting the drink temperatures Pre-brewing feature Pre-grinding feature Hot water feature Total coffee counter Setting the standby timer Activating the system lock System lockDeactivating the system lock Before using the coffee system Filling the water tank Water tankOpen the front of the machine Filling the coffee bean container Coffee bean containerAdjusting the coffee dispensers Setting the serving sizesCoffee and espresso Hot water Pre-warming cups Making coffeePre-warming Pre-warming the systemEspresso or coffee Canceling preparationPreparing two cups simultaneously Cappuccino Making coffee Dispensing hot water Adjusting the coffee grinder Setting the coffee grinderTo adjust the grinder setting To adjust the quantity setting Setting the quantityDaily care Coffee system careStainless steel colored controls Wipe up any spills of descaling solution immediatelyExterior Stainless steelDrip catch Steam valve Waste unitLift the waste unit up and out Brew unit After cleaning press PressRemove the waste unit Rinsing cycle Degreasing the brew unitCleaning the brew unit filters Lubricating the brew unit Remove the brew unit Resetting the brew unit’s basic Change the gaskets position Open the appliance door Changing the light bulbAutomatic descaling Descaling the applianceOnly use the enclosed descaling tablets for descaling Descaling the appliance Descaling the appliance Message Possible fault Fix Fault messagesFrequently asked questions Slowly? Coffee is not What if Possible fault Fix Espresso isDispensed too Quickly?Slide won’t move? What if Possible fault Fix No water runs outGrinder setting Dispensers? There is no crema?Frequently asked questions After sales service Installation instructions Disposal of packing material Caring for the environmentDisposal of an old appliance This Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation Installation Coffee glossary Alteration rights reserved / 44 / USA/CDN