Miele KM 5950, KM 5940 installation instructions Safety distance above the appliance

Page 35

Safety instructions for installation

Safety distance above the appliance

A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer’s operating and installation instructions for details.

If the manufacturer’s instructions are not available for the cooker hood, a minimum safety distance of at least

760 mm must be maintained. For any flammable objects, e.g. utensil rails, wall units etc. a minimum distance of at least 760 mm must be maintained between them and the appliance below.

When two or more appliances are installed together below a cooker hood, e.g. a gas wok and a ceramic hob, which have different safety distances given in the installation instructions, you should select the greater distance of the two.

35

Image 35
Contents En GB Contents Installation General installation tips Guide to the appliance Guide to the appliance Cooking zone display Sensor switches forControl panel Rating in watts for 230 Cooking zonesCooking zone Correct application Safety with children Technical safety Correct use Page Page Disposal of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Induction principle InductionNoises Tips on saving energy PansSuitable pans include Unsuitable pansUse Sensor switchesTo switch a cooking zone on Switching onTo switch the hob on Cooking process Settings SettingsHeat-up time Auto heat-upBooster function To switch on the Booster functionTo switch off the Booster function To switch off the hob Switching off and residual heat indicatorsTo switch off a cooking zone To deactivate the safety lock Safety featuresSafety lock To activate the safety lockSafety switch-off if the sensors are covered Safety switch-offSafety switch-off with an over-long cooking time Power setting MaximumOverheating protection Cleaning and care Ceramic surface To set the status Programme Status SettingProgramming To set the programmeAppears in the display for a cooking zone Problem solving guideWhat to do if Hob or cooking zones cannot be switched on One of the following has occurred Optional accessories Safety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Safety distances underneath the hob Flush-fitted hobs Hob with frame or bevelled edges 422 Building-in dimensions220 Preparing the worktop InstallationInstalling the hob Tiled worktop General installation tipsImportant U.K Electrical connectionElectrical connection Wiring diagram After sales service, data plate Page Alteration rights reserved