Miele KM 5940, KM 5950 installation instructions Cleaning and care

Page 28

Cleaning and care

A range of Miele branded cleaning products is available from Miele. See "Optional accessories" for details.

￿Do not use a steam cleaning appliance to clean this appliance. The steam could reach the electrical components and cause a short circuit.

The appliance should be cleaned regularly, preferably after each use. Allow it to cool down to room temperature before cleaning.

To avoid water marks and limescale deposits, use a soft cloth to dry surfaces that have been cleaned with water.

To avoid damaging the outer surfaces of your appliance, do not use:

cleaning agents containing soda, alkalines, ammonia, acids or chlorides,

cleaning agents containing descaling agents,

stain or rust removers,

abrasive cleaning agents, e.g. powder cleaners and cream cleaners,

solvent-based cleaning agents,

dishwasher cleaner,

grill and oven cleaners,

glass cleaning agents,

hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents,

sharp, pointed objects which could damage the seal between the ceramic surface and the surrounding frame, and between the frame and the worktop.

28

Image 28
Contents En GB Contents Installation General installation tips Guide to the appliance Guide to the appliance Control panel Sensor switches forCooking zone display Cooking zone Cooking zonesRating in watts for 230 Correct application Safety with children Technical safety Correct use Page Page Disposal of the packing material Caring for the environmentDisposal of your old appliance Cleaning for the first time Before using for the first timeBefore using for the first time Induction Induction principleNoises Pans Suitable pans includeUnsuitable pans Tips on saving energySensor switches UseTo switch the hob on Switching onTo switch a cooking zone on Settings Cooking process SettingsAuto heat-up Heat-up timeTo switch off the Booster function To switch on the Booster functionBooster function To switch off a cooking zone Switching off and residual heat indicatorsTo switch off the hob Safety features Safety lockTo activate the safety lock To deactivate the safety lockSafety switch-off Safety switch-off with an over-long cooking timePower setting Maximum Safety switch-off if the sensors are coveredOverheating protection Cleaning and care Ceramic surface Programme Status Setting ProgrammingTo set the programme To set the statusWhat to do if Hob or cooking zones cannot be switched on Problem solving guideAppears in the display for a cooking zone One of the following has occurred Optional accessories Safety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Safety distances underneath the hob Flush-fitted hobs Hob with frame or bevelled edges Building-in dimensions 422220 Installing the hob InstallationPreparing the worktop General installation tips Tiled worktopElectrical connection Important U.KElectrical connection Wiring diagram After sales service, data plate Page Alteration rights reserved