Miele KM 5950, KM 5940 installation instructions Safety distances underneath the hob

Page 37

Safety instructions for installation

Safety distances underneath the hob

To ensure sufficient ventilation to the hob, a certain gap must be left between the underside of the hob and any oven, interim shelf or drawer.

The minimum gap between the underside of the hob and

the top of an oven is 15 mm.

the top of an interim shelf is 15 mm. A space of at least 10 mm must also be left at the back to accommodate the cable.

the base of a drawer must be 75 mm.

37

Image 37
Contents En GB Contents Installation General installation tips Guide to the appliance Guide to the appliance Control panel Sensor switches forCooking zone display Cooking zone Cooking zonesRating in watts for 230 Correct application Safety with children Technical safety Correct use Page Page Disposal of the packing material Caring for the environmentDisposal of your old appliance Cleaning for the first time Before using for the first timeBefore using for the first time Induction principle InductionNoises Suitable pans include PansUnsuitable pans Tips on saving energyUse Sensor switchesTo switch the hob on Switching onTo switch a cooking zone on Cooking process Settings SettingsHeat-up time Auto heat-upTo switch off the Booster function To switch on the Booster functionBooster function To switch off a cooking zone Switching off and residual heat indicatorsTo switch off the hob Safety lock Safety featuresTo activate the safety lock To deactivate the safety lockSafety switch-off with an over-long cooking time Safety switch-offPower setting Maximum Safety switch-off if the sensors are coveredOverheating protection Cleaning and care Ceramic surface Programming Programme Status SettingTo set the programme To set the statusWhat to do if Hob or cooking zones cannot be switched on Problem solving guideAppears in the display for a cooking zone One of the following has occurred Optional accessories Safety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Safety distances underneath the hob Flush-fitted hobs Hob with frame or bevelled edges 422 Building-in dimensions220 Installing the hob InstallationPreparing the worktop Tiled worktop General installation tipsImportant U.K Electrical connectionElectrical connection Wiring diagram After sales service, data plate Page Alteration rights reserved