Miele H 5681 BP, H 5688 BP installation instructions Normal soiling, Heavy soiling, Please note

Page 57

Cleaning and care

Normal soiling

Clean the surfaces using a damp Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid. Wipe dry using a soft cloth.

Remove any cleaning agent residues as these could reduce the anti-stick effect.

Heavy soiling

If necessary, the scouring pad on the reverse of a non-stick washing-up sponge can be used to clean the runners. Cleaning is easier if a little washing-up liquid is applied to the soiling and left to soak in for a few minutes before cleaning.

For very heavy soiling the telescopic runners can be soaked in a solution of hot water and washing-up liquid for a maximum of 10 minutes.

After cleaning there may be some discolouration or lightening to the telescopic runners. This will not affect the functioning of the runners in any way.

Please note:

When baking cakes with moist toppings or fillings e.g. fruit crumble, be careful not to let them spill over. Should this happen there is a danger of sticky fruit juices adhering to the runners and hindering or even preventing their movement in and out of the oven. Clean the runners as described above and very carefully use a soft nylon brush to clean the bearings inside the runners.

Lubricating the FlexiClip telescopic runners

If the lubrication on the telescopic runners dries out, they can be relubricated as necessary to ensure they continue to run smoothly.

A special lubricant is available from Miele.

Only use this special lubricant, as it is designed to withstand high temperatures in the oven.

Other lubricants can harden and stick to the telescopic runners when they are heated.

57

Image 57

Contents En GB Page Contents Contents Contents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Caring for the environment Disposal of the packing materialDisposing of your old appliance 5681 BP, H 5688 BP Guide to the applianceFeatures Safety featuresOven controls Door contact switch Energy saving featuresUsing residual heat Energy save modePyrolytic cleaning PerfectClean treated surfacesUser instructions Moisture plusBaking tray, universal tray and rack with non-tip notches Energy efficiency rating according to ENFlexiClip telescopic runners Food probe Changing the position of the FlexiClip telescopic runnersOpener Descaling tablets, plastic tube with clipHandle depending on model Anti-splash insert depending on modelMielehome Optional accessoriesInformation is displayed via Home of the futureControls SensorsMeaning Main menu DisplaySymbol Meaning SymbolsFinish Functions Top heat Function Conventional heatBottom heat Full grillTo enter basic settings Before using for the first timeCleaning and heating up for the first time Automatic programmes OperationManual operation To change the temperature More about manual operationTo select a function Duration Entering the Duration, a Start time or Finish timeStart time FinishAfter the heating-up phase Delaying the start with Automatic switch-offBefore the programme starts After the programme has startedChanging the heating-up phase Pre-heating the oven With Fan plusWith Conventional heat Change function Activating moisture reductionUser programmes menu User programmesTo call up an existing User programme To create a User programmeMoisture plus Night baking Number of bursts of steam and when they are injected Using Moisture plus Automatic burst of steamInjecting bursts of steam manually To evaporate residual moisture Residual moisture evaporation processTo start the residual moisture evaporation process Descaling To cancel the time set for the minute minder Minute minder egg timerTo set the minute minder To alter the time set for the minute minderLanguage SettingsLighting TimeDisplay To set the time of dayCatalyser Main menuHeating-up phase Cooling fan run-onPyrolytic Start Recommended temperaturesContrast BrightnessBuzzer tones VolumeFrequency Keypad toneSafety To switch the system lock on or offOperation lock Factory default Units Showroom programme Appliance front Cleaning and careRack, runners When cleaning do not useHeavy soiling Normal soilingPlease note Lubricating the FlexiClip telescopic runnersPerfectClean Cleaning and care Oven interior Manual cleaning of the oven interiorStarting a pyrolytic process Pyrolytic cleaning of the oven interiorPyrolytic process will be cancelled To remove the oven door To dismantle the oven door Cleaning and care Cleaning and care To refit the door To remove the FlexiClip telescopic runners Refit the runners carefully as described in FeaturesTo lower the top heat/grill element To remove the side runnersDescaling process overview When to run the descaling programmeStart the descaling process PreparationCleaning and care Problem Possible cause and remedy Problem solving guideProblem solving guide Problem solving guide After Sales / Guarantee After sales serviceGuarantee Optional accessories Baking tray, universal tray and rackFlan/Pizza dish Gourmet oven dish Miele oven cleanerGourmet oven dish lid Catalytic linersImportant U.K Electrical connectionBuilding-in diagrams Appliance and niche dimensionsInstallation in a base unit Installation in a tall unit Front dimensions Installing the oven