Miele DG 1050 manual Cleaning and heating up for the first time

Page 15

Before using for the first time

Cleaning and heating up for the first time

Open the door by pressing on the left hand side of the door release. The door will open slightly.

Take the water container out of the appliance and remove the insert (see "Cleaning and care"). Rinse the water container and the insert thoroughly by hand using hot water. Do not use any washing-up liquid or detergent.

Do not clean the water container or the insert in a dishwasher. Do not immerse the water container in water.

Take all accessories out of the steam oven and wash them in a mild solution of washing-up liquid and hot water or in the dishwasher (this does not apply to the water container and insert - see above).

The interior of the steam oven has been treated with a conditioning agent before leaving the factory. To remove this, clean the cooking compartment with a mild solution of washing-up liquid and hot water and then dry thoroughly with a soft cloth.

Now fill the water container with mains tap water (see "Before each use") and then run the appliance for 15 minutes at 100°C for 15 minutes. Proceed as described in "Operation".

This process flushes out the waterways and sets the appliance for the altitude in your area.

If you move house, the appliance will need to be re-set for the new altitude if this differs from the old one by more than 300 m. To do this, descale the appliance (see "Cleaning and care").

Warning! A lot of steam will be emitted from the appliance the first time it is used, and the first time it is descaled after moving house.

15

Image 15
Contents Operating instructions Steam oven Contents Contents Front view Description of the applianceSilicone grease Accessories suppliedRack Miele steam oven cookbookStainless steel containers Optional accessoriesDescription of the appliance Other accessories Description UseTechnical safety Correct use Protecting the appliance from damage Safety with childrenProtection from burning and scalding Futher safety notes Appliance faultsCaring for the environment Disposal of the packing materialDisposal of your old appliance Proceed as follows Before using for the first timeSetting the water hardness Hardness DisplayCleaning and heating up for the first time Operation Before each useOperating sequence Recommended temperature Switching on and setting a temperatureSetting a cooking duration Interrupting a programme After starting a programmeAt the end of the cooking duration After useInsufficient water Suitable containers Practical tipsPractical tips Vegetables SteamingFood Duration in minutesFood Temperature in C Duration in minutes Meat Fish freshMiscellaneous Fruit Dried beans and pulsesRice EggsTips on steaming Practical tips Useful tip ReheatingDefrosting Tips on defrosting Produce Temp Duration Minutes Obst BottlingCooking whole meals Preparing yoghurt BlanchingDisinfecting baby bottles Glas Cleaning and careAppliance front and housing General notesCondensate tray, rack and cooking containers Oven interiorWater container Coupling seal Descaling After descaling Programming Programme Display SettingWhat to do if Problem solving guideYou cannot switch the appliance on Heating up phase lasts an unusually long timeF20 appears in the display F05 or F06 appears in the displayAfter sales service, data plate Important U.K Electrical connectionNon-rewireable plugs BS Technical data Alteration rights reserved