Programming
|
|
|
|
|
|
Programme option* | Status** | Setting | |||
P | 1 | Buzzer volume | S | 00 | Very quiet |
|
|
| S | 01 | Quiet |
|
|
| S | 02 | Medium |
|
|
| S | 03 | Loud |
P | 2 | Audible tone at end of | S | 00 | Single beep |
|
| programme | S | 01 | Beeps for a short time |
|
|
| |||
|
|
| S | 02 | Beeps for 5 minutes |
P | 3 | Safety lock | S | 00 | Not possible |
|
|
| S | 01 | Possible |
P | 4 | Programme in display after | S | 00 | Steam with pressure |
|
| switching on | S | 01 | Steam without pressure |
|
|
| |||
|
|
| S | 02 | Reheat |
|
|
| S | 03 | Defrost |
|
|
| S | 04 | Last programme selected |
P | 5 | Water hardness | S | 01 | Soft |
|
|
| S | 02 | Medium |
|
|
| S | 03 | Hard |
|
|
| S | 04 | Very hard |
P | 6 | Location (altitude) | S | 00 | Below 1000 m |
|
|
| S | 01 | Above 1000 m |
P | 7 | Altering the temperature | S | 00 | In 5° increments |
|
|
| S | 01 | In 1° increments (note that |
|
|
|
|
| when warming up, the |
|
|
|
|
| temperature of the appliance |
|
|
|
|
| will continue to be shown in |
|
|
|
|
| 5° increments) |
P | 8 | Demonstration mode and | S | 00 | Demonstration mode on |
|
| factory default settings | S | 01 | Demonstration mode off |
|
|
| |||
|
|
| S | 09 | Factory default settings |
|
|
|
|
| reinstated |
|
|
|
|
|
|
*Programmes not shown here have no allocation. ** The factory default settings are shown in bold.
50