|
| Problem solving guide | |
|
| ||
... After switching on, the descaling | ... the following fault messages | ||
programme symbol k and 00 appear | appear in the | ||
in the programme/temperature | programme/temperature display. | ||
display, the k symbol also appears |
|
|
|
|
|
| |
| For all fault messages: |
| |
on the left of the display, and the |
|
| |
appliance beeps. |
| The door can only be opened when: |
|
The appliance needs to be descaled. |
| - the fault message is flashing |
|
| alternately with the set |
| |
Proceed as described in "Descaling" in |
|
| |
| temperature, |
| |
"Cleaning and care". |
|
| |
| - the g symbol is flashing in the |
| |
|
|
| |
|
| time display, |
|
|
| - the alarm has stopped. |
|
... k and E04 appear in the |
| If the display is not flashing, the |
|
programme/temperature display and |
| appliance is still processing the |
|
0:06 appears in the time display. |
| fault. |
|
|
|
|
|
|
|
|
|
The descaling process was interrupted by a power cut or by being inadvertently switched off.
The appliance will automatically carry out a rinsing programme after being switched on again to flush out any descaling fluid. This process cannot be aborted. Wait until you hear several beeps, and the g symbol is flashing in the time display. Now you can either
F06 The temperature thermostat is faulty.
Switch the appliance off and call the Service Department.
F12 p Water is not getting into the appliance.
Check whether
–the stopcock is open. If necessary open it and start the programme again.
–the water inlet hose is faulty.
–the filter in the water inlet is blocked.
If you cannot remedy the fault yourself, switch the appliance off and call a plumber or the Service Department.
53