Miele K9752, K9552 Replace all the covers, To make sure the appliance is correctly fitted

Page 48

Building in the appliance

^ Replace all the covers.

To make sure the appliance is correctly fitted:

–The door must close properly.

–The door must not touch the furniture carcase.

–The seal at the top edge of the handle side must fit properly.

To double check place a torch in the appliance and close the doors. Turn the lights out in the room. If you can see any light shining out from the sides double check the installation.

48

Image 48

Contents En GB, HK Contents Contents Guide to the appliance Guide to the appliance Caring for the environment Disposal of the packing materialDisposal of your old appliance Safety with children Correct applicationTechnical safety Correct use Disposal of your old appliance How to save energy Normal energy Increased energy ConsumptionSwitching on and off Before using for the first timeSwitching off Safety lockSwitching off for longer periods of time Activating or de-activating the safety lockCorrect temperature Setting the temperature in the refrigeratorTemperature display Temperature rangeTemperature display brightness Correct temperature Super cool and Dynamic cooling Super coolDynamic cooling m Switching off Dynamic cooling Using the refrigerator efficiently Different storage zonesWarmest area Coldest areaWhen shopping for food Food which should not be stored in a refrigeratorStoring food correctly Fruit and vegetablesUnpacked meat and vegetables Protein rich foodsMeat Adjusting the interior fittings Moving the shelvesSplit shelf Fruit and vegetable containers on roller insertAdjusting the condiment tray/bottle shelf Fruit and vegetable containers on telescopic runnersUniversal container Moving the bottle dividerAutomatic defrost Cleaning and care Before cleaningCleaning the interior and accessories ClothAfter cleaning Ventilation gapsDoor seal Problem solving guide Interior lighting is not working Floor of the refrigerator is wetNoises Normal noises What causes themAfter Sales / Guarantee GuaranteeNon-rewireable plugs BS Electrical connectionElectrical connection U.K Installation LocationVentilation Important tropical / humid environmentsBefore installation Does your old appliance have a different hinging mechanism?Stainless steel front Building-in dimensions Niche height mm9552 iD 1397 9752 iD 1772 Adjusting the door hinges Changing the door hinging Appliance doorTo remove the soft-close mechanism To secure the soft-close mechanism Changing the door hinging Weight of the furniture door Aligning the housing unitTo install the appliance you will need the following Building in the appliancePreparing the appliance Open the appliance doorBuilding in the appliance With 16 mm thick wallsWith 19 mm thick walls Securing the appliance in the niche Fitting a furniture door Building in the appliance Securing the appliance door to the furniture door Replace all the covers To make sure the appliance is correctly fittedPage Page Page Alteration rights reserved Nr 470 031 ID -1, K 9752 iD