Switching on and off
Before using for the first time | Switching on |
The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent scratching during transportation.
^Do not remove this foil until the appliance has been built in.
^Treat the stainless steel surfaces with a proprietary stainless steel conditioner immediately after removing the foil (available from the Miele Spare Parts Department or via the internet on www.miele.co.uk).
Important! A stainless steel conditioner gives long lasting protection, and helps to prevent resoiling.
^Clean the inside of the appliance and the accessories with warm water and a little
Important:
To ensure the correct functioning of the appliance, let it stand for between 1½ and 2 hours after transporting it to its final location before connecting it to the mains.
^Press the On/Off button.
The temperature display lights up, the appliance starts cooling and the interior light will come on when the door is opened.
To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it.
Switching off
^Press the On/Off button until the temperature display goes out.
The cooling system is switched off. (If this does not happen, the safety lock is still activated).
Safety lock
The safety lock can be activated to prevent the appliance being switched off inadvertently.
12