Miele K9552, K9752 installation instructions Fruit and vegetable containers on telescopic runners

Page 23

Adjusting the interior fittings

Fruit and vegetable containers on telescopic runners

(depending on model)

The fruit and vegetable containers are pushed in and out on telescopic runners, and can be completely removed if necessary.

^Pull the container right out and then lift it up and off.

Push the runners back in again to avoid injury or damage.

To replace a container,

^place it back on the fully extended runners a. The front of the runners must be right up against the front of the container b.

^Then push the container back in c.

Adjusting the condiment tray/bottle shelf

^Lift the tray/shelf up and out of the stainless steel frame to remove.

^Push up the stainless steel frame, and remove.

^Replace the frame at the required height. Ensure that it is securely pushed back into position.

^Replace the tray/shelf in the frame.

The tray/shelf can be removed completely and used as a serving tray at the table.

23

Image 23

Contents En GB, HK Contents Contents Guide to the appliance Guide to the appliance Disposal of your old appliance Caring for the environmentDisposal of the packing material Correct application Safety with childrenTechnical safety Correct use Disposal of your old appliance Normal energy Increased energy Consumption How to save energySafety lock Switching on and offBefore using for the first time Switching offActivating or de-activating the safety lock Switching off for longer periods of timeSetting the temperature in the refrigerator Correct temperatureTemperature display brightness Temperature displayTemperature range Correct temperature Dynamic cooling m Super cool and Dynamic coolingSuper cool Switching off Dynamic cooling Coldest area Using the refrigerator efficientlyDifferent storage zones Warmest areaFruit and vegetables When shopping for foodFood which should not be stored in a refrigerator Storing food correctlyMeat Unpacked meat and vegetablesProtein rich foods Fruit and vegetable containers on roller insert Adjusting the interior fittingsMoving the shelves Split shelfFruit and vegetable containers on telescopic runners Adjusting the condiment tray/bottle shelfMoving the bottle divider Universal containerAutomatic defrost Cloth Cleaning and careBefore cleaning Cleaning the interior and accessoriesDoor seal After cleaningVentilation gaps Problem solving guide Floor of the refrigerator is wet Interior lighting is not workingNormal noises What causes them NoisesGuarantee After Sales / GuaranteeElectrical connection U.K Non-rewireable plugs BSElectrical connection Important tropical / humid environments InstallationLocation VentilationDoes your old appliance have a different hinging mechanism? Before installationStainless steel front 9552 iD 1397 9752 iD 1772 Building-in dimensionsNiche height mm Adjusting the door hinges To remove the soft-close mechanism Changing the door hingingAppliance door To secure the soft-close mechanism Changing the door hinging Building in the appliance Weight of the furniture doorAligning the housing unit To install the appliance you will need the followingOpen the appliance door Preparing the applianceWith 19 mm thick walls Building in the applianceWith 16 mm thick walls Securing the appliance in the niche Fitting a furniture door Building in the appliance Securing the appliance door to the furniture door To make sure the appliance is correctly fitted Replace all the coversPage Page Page Alteration rights reserved Nr 470 031 ID -1, K 9752 iD