Miele K9552 Building in the appliance, Weight of the furniture door, Aligning the housing unit

Page 41

Building in the appliance

All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly.

To install the appliance you will need the following:

–a cross-slotted screwdriver,

–a selection of Torx screwdrivers,

–a hexagon spanner.

Weight of the furniture door

Before fitting a furniture door, ensure that the weight of the door does not exceed the maximum permitted:

	Appliance	Maximum weight of
	Appliance	furniture door in kg
		furniture door in kg


	K 9552 iD (-1)	15
	K 9752 iD (-1)	18

Fitting a door which is heavier than the maximum permitted could damage the hinges.

Building into a peninsular run

When built into a peninsular run, the rear of the building-in niche must be fitted with a kitchen furniture panel.

Aligning the housing unit

The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance.

41

Image 41

Contents En GB, HK Contents Contents Guide to the appliance Guide to the appliance Disposal of your old appliance Caring for the environmentDisposal of the packing material Correct application Safety with childrenTechnical safety Correct use Disposal of your old appliance Normal energy Increased energy Consumption How to save energyBefore using for the first time Switching on and offSwitching off Safety lockActivating or de-activating the safety lock Switching off for longer periods of timeSetting the temperature in the refrigerator Correct temperatureTemperature display brightness Temperature displayTemperature range Correct temperature Dynamic cooling m Super cool and Dynamic coolingSuper cool Switching off Dynamic cooling Different storage zones Using the refrigerator efficientlyWarmest area Coldest areaFood which should not be stored in a refrigerator When shopping for foodStoring food correctly Fruit and vegetablesMeat Unpacked meat and vegetablesProtein rich foods Moving the shelves Adjusting the interior fittingsSplit shelf Fruit and vegetable containers on roller insertFruit and vegetable containers on telescopic runners Adjusting the condiment tray/bottle shelfMoving the bottle divider Universal containerAutomatic defrost Before cleaning Cleaning and careCleaning the interior and accessories ClothDoor seal After cleaningVentilation gaps Problem solving guide Floor of the refrigerator is wet Interior lighting is not workingNormal noises What causes them NoisesGuarantee After Sales / GuaranteeElectrical connection U.K Non-rewireable plugs BSElectrical connection Location InstallationVentilation Important tropical / humid environmentsDoes your old appliance have a different hinging mechanism? Before installationStainless steel front 9552 iD 1397 9752 iD 1772 Building-in dimensionsNiche height mm Adjusting the door hinges To remove the soft-close mechanism Changing the door hingingAppliance door To secure the soft-close mechanism Changing the door hinging Aligning the housing unit Weight of the furniture doorTo install the appliance you will need the following Building in the applianceOpen the appliance door Preparing the applianceWith 19 mm thick walls Building in the applianceWith 16 mm thick walls Securing the appliance in the niche Fitting a furniture door Building in the appliance Securing the appliance door to the furniture door To make sure the appliance is correctly fitted Replace all the coversPage Page Page Alteration rights reserved Nr 470 031 ID -1, K 9752 iD