Miele K9752, K9552 Adjusting the interior fittings, Moving the shelves, Split shelf

Page 22

Adjusting the interior fittings

Moving the shelves

The shelves can be adjusted according to the height of the food.

^Raise the shelf, pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.

The raised edge at the back must face upwards to prevent food from touching the back of the appliance and freezing to it.

Stoppers prevent the shelves from being dislodged by mistake.

Split shelf

In order to accommodate tall items in the appliance, one of the shelves is divided. The front section can be pushed under the rear section.

^Push the rear half of the glass shelf up slightly from below.

^At the same time, pull the front half of the glass shelf forwards slightly and then push it carefully under the rear half.

To move the split shelf:

^Take both halves of the split glass shelf out,

^fit the two brackets onto the supports on either side at the required height,

^and push the glass shelves in one after the other. The shelf with the raised edge must be at the back.

Fruit and vegetable containers on roller insert

(depending on model)

The fruit and vegetable containers are pushed in and out on rollers, and can be completely removed if necessary.

The roller inserts can also be removed for cleaning.

22

Image 22
Contents En GB, HK Contents Contents Guide to the appliance Guide to the appliance Disposal of the packing material Caring for the environmentDisposal of your old appliance Safety with children Correct applicationTechnical safety Correct use Disposal of your old appliance How to save energy Normal energy Increased energy ConsumptionSwitching off Switching on and offBefore using for the first time Safety lockSwitching off for longer periods of time Activating or de-activating the safety lockCorrect temperature Setting the temperature in the refrigeratorTemperature range Temperature displayTemperature display brightness Correct temperature Super cool Super cool and Dynamic coolingDynamic cooling m Switching off Dynamic cooling Warmest area Using the refrigerator efficientlyDifferent storage zones Coldest areaStoring food correctly When shopping for foodFood which should not be stored in a refrigerator Fruit and vegetablesProtein rich foods Unpacked meat and vegetablesMeat Split shelf Adjusting the interior fittingsMoving the shelves Fruit and vegetable containers on roller insertAdjusting the condiment tray/bottle shelf Fruit and vegetable containers on telescopic runnersUniversal container Moving the bottle dividerAutomatic defrost Cleaning the interior and accessories Cleaning and careBefore cleaning ClothVentilation gaps After cleaningDoor seal Problem solving guide Interior lighting is not working Floor of the refrigerator is wetNoises Normal noises What causes themAfter Sales / Guarantee GuaranteeElectrical connection Non-rewireable plugs BSElectrical connection U.K Ventilation InstallationLocation Important tropical / humid environmentsBefore installation Does your old appliance have a different hinging mechanism?Stainless steel front Niche height mm Building-in dimensions9552 iD 1397 9752 iD 1772 Adjusting the door hinges Appliance door Changing the door hingingTo remove the soft-close mechanism To secure the soft-close mechanism Changing the door hinging To install the appliance you will need the following Weight of the furniture doorAligning the housing unit Building in the appliancePreparing the appliance Open the appliance doorWith 16 mm thick walls Building in the applianceWith 19 mm thick walls Securing the appliance in the niche Fitting a furniture door Building in the appliance Securing the appliance door to the furniture door Replace all the covers To make sure the appliance is correctly fittedPage Page Page Alteration rights reserved Nr 470 031 ID -1, K 9752 iD