Super cool and Dynamic cooling
Super cool
The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature).
Switching on Super cool
Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink.
^Press the Super cool button. The Super cool indicator light will come on.
The appliance will then work at full power to lower the temperature.
Switching off Super cool
The Super cool function will switch itself off automatically after approx. 6 hours. The indicator light will go out and the appliance will run at normal power again.
To save energy, the Super cool function can be switched off once food and drinks are sufficiently chilled.
^Press the Super cool button. The Super cool indicator light will go out, and the appliance will continue to operate at normal power.
Dynamic cooling m
When the Dynamic cooling function is not switched on, the natural circulation of air in the appliance will cause different temperature zones in the refrigerator as the cold, heavy air will sink to the lowest section of the appliance. You should bear this in mind when placing food in the appliance (see "Using the refrigerator efficiently"). However, if you are placing a large amount of food in the refrigerator at any one time, it is a good idea to switch on Dynamic cooling. This way you can distribute the temperature inside the appliance to all areas more evenly so that all the food will be chilled to about the same degree.
The temperature is set as normal with the temperature control.
Dynamic cooling should also be selected when:
–the ambient temperature in the room is high (above approx. 30 °C), and
–the room humidity level is high.
Switching on Dynamic cooling
^Press the Dynamic cooling button m. The Dynamic cooling indicator light will come on.
17