Miele K 1801 Vi, K 1911 Vi, K 1901 Vi, K 1811 Vi installation instructions Humidity filters

Page 26

Cleaning and care

Humidity filters

The two humidity filters, located above the SmartFresh drawers, must be removed for cleaning.

Remove the SmartFresh drawer.

Remove the filter mat.

Clean the filters by rinsing them with lukewarm water.

Unhook the filter cover in each side of the drawer and remove them along with the filters downwards starting from .

Do not clean in a dishwasher or washing machine. This will damage the filter.

Air-dry the filters.

Place the filters back in the filter cover.

Put the filter cover back in place, inserting the rear hooks first.

Re-insert the SmartFresh drawer.

26

Image 26

Contents En US, CA Contents Contents Important Safety Instructions Electrical SafetyInstallation UseSave These Instructions Disposal of your old applianceGuide to the refrigerator Control panel Turning the appliance On/Off Before using for the first timeBefore use Settings Using the settingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm Temperature and door alarmTemperature alarm Temperature display Setting the temperatureSetting the temperature in the refrigerator Temperature rangeTemperature unit Fahrenheit/Celsius SmartFresh drawers Storage temperaturesUsing the SmartFresh drawers HumidityFoods that are best stored under moist conditions Tips for storing food SmartFresh drawersFoods that are best stored under dry conditions Warmest area Using the refrigerator efficientlyDifferent storage zones Coldest areaSuperCool Switching on SuperCoolSwitching off SuperCool Automatic defrost Refrigerator and SmartFresh drawersDeli drawer Adjusting the interior fittingsMoving the shelves Replacing the drawerSmartFresh drawer To remove the shelf above the SmartFresh drawers Adjusting the door shelvesRemoving the storage shelf from above the deli drawer To better maintain your appliance avoid the following Cleaning and careRemove the cleaner promptly Aluminum frames Before cleaningCleaning the interior and accessories Humidity filters Door seals After cleaningVentilation slits Changing the light bulb Upper lightingSide lighting Frequently asked questions On very frequently Issue Possible fault Solution Compressor kicksAlarm indicator is For too longSssrrrrr Blubb, blubbClick CreakingAfter sales service MieleCarePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation Installation siteFurniture/fixtures Installation nicheBase VentilationCustom door panels Installation optionsStainless steel panels Single columnSide panels Installation with partition using the Merging KitInstallation with partition without using the Merging Kit From 5/8 16 mm to 6 5/16 160 mmAdjusting the door opening angle optional accessory Front panel gap kit optional accessoryDoor dimensions open min C DimensionsDoor dimensions open min 18X118X1 30 762 mm 19X1 36 915 mm Niche dimensionsNiche width a Power supply Door front dimensions 18X1 15 381 mm 19X1 18 458 mmOptional accessories Installing the applianceTools needed for installation Before you beginAligning the housing unit Check the installation niche Before installationRemoteVision module installation Preparing the installation niche Mounting Accessories Anti-tip bracketsInstalling the appliance Securing an alternative anti-tip device Sliding the appliance into the installation space Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the fixing brackets Attaching the covers Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Page Alteration rights reserved Nr 169 670