Installation
Adjusting the door opening angle (optional accessory)
Depending on the installation site, it may be necessary to adjust the door opening angle to 90°.
Open the door.
Insert the banking pin through the holes and drive in with a hammer.
The door opening angle is now limited to 90°.
Front panel gap kit (optional accessory)
Two adjacent furniture doors can be attached instead of one large door.
To connect these furniture doors on the rear, a metal strip can be purchased as an optional accessory. Contact Miele.
When attaching the metal strip to the furniture doors, observe the maximum length of the screws and the position of the drill holes.
Always screw into the best possible
41