Miele K 1801 Vi, K 1911 Vi, K 1901 Vi, K 1811 Vi installation instructions Frequently asked questions

Page 30

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser- vice call.

Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.

Issue

Possible fault

Solution

The refrigerator does

The machine is not

Check whether the appliance

not get cold.

turned on.

is switched on at the main

 

 

switch. The temperature

 

 

display must be lit up.

 

 

 

 

The machine is not

Check that the plug is

 

plugged in.

correctly inserted in the power

 

 

outlet.

 

 

 

 

Check that the fuse has

Reset the circuit breaker.

 

not tripped.

 

 

 

If the breaker trips again the

 

 

appliance or the outlet may be

 

 

defective. Contact Miele or a

 

 

qualified electrician.

 

 

 

 

The temperature is set

Check the display.

 

incorrectly.

 

Issue

Possible fault

Solution

The temperature in

Select a warmer

See "Selecting the correct

the refrigerator is

temperature.

temperature".

too low.

 

 

The SuperCool function

If, nessary turn off the

 

 

is still on.

SuperCool function.

 

 

 

 

The door is not closed.

Check that the door has been

 

 

closed properly.

 

 

 

 

A large amount of food is

This makes the compressor

 

put in the refrigerator at

run longer, causing the

 

the same time.

temperature to fall

 

 

automatically.

30

Image 30
Contents En US, CA Contents Contents Important Safety Instructions Electrical SafetyInstallation UseSave These Instructions Disposal of your old applianceGuide to the refrigerator Control panel Before using for the first time Before useTurning the appliance On/Off Settings Using the settingsCustom settings Turning the button sound On/OffFunction Display text Turning off for longer periods of time Temperature and door alarm Temperature alarmDoor alarm Temperature display Setting the temperatureSetting the temperature in the refrigerator Temperature rangeTemperature unit Fahrenheit/Celsius SmartFresh drawers Storage temperaturesUsing the SmartFresh drawers HumidityTips for storing food SmartFresh drawers Foods that are best stored under dry conditionsFoods that are best stored under moist conditions Warmest area Using the refrigerator efficientlyDifferent storage zones Coldest areaSwitching on SuperCool Switching off SuperCoolSuperCool Automatic defrost Refrigerator and SmartFresh drawersDeli drawer Adjusting the interior fittingsMoving the shelves Replacing the drawerSmartFresh drawer Adjusting the door shelves Removing the storage shelf from above the deli drawerTo remove the shelf above the SmartFresh drawers Cleaning and care Remove the cleaner promptlyTo better maintain your appliance avoid the following Before cleaning Cleaning the interior and accessoriesAluminum frames Humidity filters After cleaning Ventilation slitsDoor seals Changing the light bulb Upper lightingSide lighting Frequently asked questions On very frequently Issue Possible fault Solution Compressor kicksAlarm indicator is For too longSssrrrrr Blubb, blubbClick CreakingAfter sales service MieleCarePage Installation instructions Caring for the environment Disposal of packing materialsDisposal of an old appliance Installation Installation siteFurniture/fixtures Installation nicheBase VentilationCustom door panels Installation optionsStainless steel panels Single columnSide panels Installation with partition using the Merging KitInstallation with partition without using the Merging Kit From 5/8 16 mm to 6 5/16 160 mmAdjusting the door opening angle optional accessory Front panel gap kit optional accessoryDoor dimensions open min C DimensionsDoor dimensions open min 18X1Niche dimensions Niche width a18X1 30 762 mm 19X1 36 915 mm Power supply Door front dimensions 18X1 15 381 mm 19X1 18 458 mmOptional accessories Installing the applianceTools needed for installation Before you beginAligning the housing unit Check the installation niche Before installationRemoteVision module installation Preparing the installation niche Mounting Accessories Anti-tip bracketsInstalling the appliance Securing an alternative anti-tip device Sliding the appliance into the installation space Aligning the appliance Attaching the appliance to the installation niche Installing the appliance Preparing the custom door Installing the appliance Attaching and aligning the custom door front Attaching the fixing brackets Attaching the covers Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options Page Page Alteration rights reserved Nr 169 670