Miele K 1901 Vi, K 1911 Vi, K 1801 Vi, K 1811 Vi installation instructions Installing the appliance

Installing the appliance

￿Mark the distance X on the back-side of the custom door.

￿Also calculate and mark the center of the custom door Y.

￿Remove the mounting frame from the appliance door and position it according to the markings on the custom door.

￿Pre-drill the holes.

￿Tightly screw on the bracket using the pre-drilled holes:

Attach the bracket to each attachment point with at least one screw.

￿Attach the bracket at the top with at least 6 screws.

Please note: When attaching the mounting frame onto two adjacent doors (see "Front panel gap kit") screw into the thicker outer frames of the doors only.

The bracket includes a variety of holes for the various design options of custom doors.

When performing work on the custom door, always observe the following:

–Always select the best load-bearing surface of the custom door as the location for screws.

–Always select a screw length that is shorter than the thickness of the door front.

￿Secure the door handle to the front of the appliance from the inside.

57