Miele K 1901 Vi, K 1911 Vi, K 1801 Vi, K 1811 Vi Mounting Accessories, Anti-tip brackets

Installing the appliance

Mounting Accessories

The mounting accessories needed for installing the appliance into the niche are included in the packaging. Several plastic bags are included which are numbered alphabetically.

The bag needed for each step will be marked with its respective letter.

￿Use the included Torx screwdriver to tighten the screws.

Anti-tip brackets

The anti-tip brackets help keep the appliance safely secured to the installation niche to prevent tipping.

Two anti-tip brackets are recommended for each appliance or appliance combination (side-by-side).

If the installation niche is deeper than the appliance, a solid wooden beam ￿ can be placed behind the anti-tip brackets ￿ so the appliance can be securely attached to the base or wall.

The length of the wooden beam ￿ should be the width of the installation space.

The distance "D" between the anti-tip brackets ￿ is the width of the appliance.

￿Position the anti-tip brackets ￿ on the left and right walls of the appliance niche.

￿Mark the holes through the anti-tip brackets ￿ on the floor of the installation niche.

￿Set the brackets aside.

Screws are supplied with the appliance for various applications/materials.

If the anti-tip brackets cannot be attached securely with the screws supplied, an alternative anti-tip device can be used.

Assure that there are no electrical wires in the area which the screws could penetrate - risk of injury and damage.

49