Vulcan-Hart VCRG24-T operation manual Troubleshooting, Problem, Possible Causes

Page 14

PROBLEM

Burner does not come on when the control knob is turned on

Pilot burner will not light

Pilot burner will not stay lit

Fat appears to smoke excessively

Food sticks to griddle or burned around edges or contains dark specs

Food under-cooked inside

Food tastes greasy or has objectionable off-flavor

Noticeable build-up of gum on griddle

TROUBLESHOOTING

POSSIBLE CAUSES

1.Problem with gas valve. (Call for service)

2.Pilot burner not lit. (Call for service)

3.Low gas pressure. (Call for service)

1.Manual gas valve not turned on.

2.Obstructed pilot orifice. (Call for service)

3.Pilot gas turned off at pilot. Adjust pilot to allow gas flow.

4.Low gas pressure. (Call for service)

1.Obstructed or wrong size pilot orifice. (Call for service)

2.Gas supply not purged of air. Depress pilot safety button until air is purged.

3.Air blowing pilot out. (Call for service)

4.Low gas pressure. (Call for service)

1.Temperature set too high.

2.Moisture in food may be turning into steam

1.Temperature set too high.

2.Griddle surface requires cleaning and/or seasoning.

3.Surface under food not covered with enough cooking oil.

1.Temperature set too low.

2.Food not cooked for long enough time.

1.Food itself may have off-flavor.

2.Food stored improperly before cooking.

3.Too much griddle fat used.

4.Temperature set too low.

1.Temperature set too high.

2.Griddle surface needs cleaning and/or seasoning.

3.Too much griddle fat used.

- 14 -

Image 14
Contents Models VCRG48-TFor Your Safety Important for Your SafetyLocation InstallationUnpacking Installation Codes and Standards Griddles Mounted on Stands with CastersFlue Connections Testing the GAS Supply SystemGAS Pressure Regulator Installation GAS ConnectionsPropane GAS Conversion Seasoning the Griddle OperationBefore First USE ControlsVCRG-T / WCRG-T Pilot Lighting Procedure Cutaway ViewZone Using the GriddleZone Cooking ProductOnce PER DAY Cleaning the GriddleAfter Each USE Once PER WeekAdjustments CalibrationPilot Adjustment LevelingMaintenance Possible Causes TroubleshootingProblem VCRG48 Sécurité Votre Pour Sécurité Votre Pour ImportantDéballage DES Entretien ET Emploi InstallationEmplacement ’INSTALLATION Normes ET Codes Roulettes Avec Supports SUR Montées Chauffantes PlaquesConduits DES Connexions GAZ DU Pression DE Régulateur DU InstallationGAZ EN Dalimentation Système DU Évaluation Propane GAZ DU Conversion OrificePilot Chauffante Plaque LA DE Rodage CommandesEmploi Utilisation Première LA AvantCoupe DE VUE Produit Cuisson DE ZonesChauffante Plaque LA Nettoyage Semaine PAR Fois UNEUtilisation Chaque Après Réglages Calibrage’ALLUMAGE Veilleuse LA DE Réglage Niveau À MiseVentilation EntretienPièces LES ET L’ENTRETIEN SUR Renseignements Prolongée FermetureProblème DépannagePossibles Causes