Vulcan-Hart VCRG24-T operation manual Maintenance

Page 13

SHUTDOWN OF GRIDDLE

1.Turn thermostats to the OFF position to cut off burners.

2.The pilots will remain lit and monitored by the safety valve as long as the main gas supply is on.

EXTENDED SHUTDOWN

1.Shut off the main gas supply valve.

2.Apply a heavy coat of vegetable oil over the griddle plate to inhibit rust.

MAINTENANCE

The griddle and its parts are hot. Use care when operating, cleaning or servicing the griddle.

LUBRICATION

There are no parts on this griddle that require lubrication.

VENT

Daily, when the griddle is cool, check the flue and clear any obstructions.

SERVICE AND PARTS INFORMATION

Contact the Service Agency in your area to obtain service and parts information. For a complete listing of Service and Parts depots refer to or www.vulcanhart.com.

When calling for service, the following information should be available from the appliance identification plate: Model Number, Serial Number and Gas Type.

- 13 -

Image 13
Contents VCRG48-T ModelsImportant for Your Safety For Your SafetyUnpacking InstallationLocation Griddles Mounted on Stands with Casters Installation Codes and StandardsGAS Pressure Regulator Installation Testing the GAS Supply SystemFlue Connections GAS ConnectionsPropane GAS Conversion Before First USE OperationSeasoning the Griddle ControlsCutaway View VCRG-T / WCRG-T Pilot Lighting ProcedureZone Cooking Using the GriddleZone ProductAfter Each USE Cleaning the GriddleOnce PER DAY Once PER WeekCalibration AdjustmentsLeveling Pilot AdjustmentMaintenance Problem TroubleshootingPossible Causes VCRG48 Sécurité Votre Pour Important Sécurité Votre PourEmplacement DES Entretien ET Emploi InstallationDéballage Roulettes Avec Supports SUR Montées Chauffantes Plaques ’INSTALLATION Normes ET CodesGAZ EN Dalimentation Système DU Évaluation GAZ DU Pression DE Régulateur DU InstallationConduits DES Connexions Pilot OrificePropane GAZ DU Conversion Emploi CommandesChauffante Plaque LA DE Rodage Utilisation Première LA AvantCoupe DE VUE Cuisson DE Zones ProduitUtilisation Chaque Après Semaine PAR Fois UNEChauffante Plaque LA Nettoyage Calibrage RéglagesNiveau À Mise ’ALLUMAGE Veilleuse LA DE RéglagePièces LES ET L’ENTRETIEN SUR Renseignements EntretienVentilation Prolongée FermeturePossibles Causes DépannageProblème