Vulcan-Hart C24GA6, C24GA10, ML-136021, ML-136022 Deliming the Generator, Striker Adjustment

Page 20

C24GA SERIES CONVECTION STEAMERS - SERVICE PROCEDURES AND ADJUSTMENTS

Striker Adjustment

1.Reinstall the striker with the slot pointing upwards and hand tighten nut only.

2.Close the door to center the striker in the oval mounting hole.

3.Open the door and check the striker’s slot for horizontal alignment. The slot on the striker must be kept horizontal in order for the door latch to catch it properly and latch.

•Safety goggles or face shield.

•Measuring cup.

•1 gallon container for mixing deliming solution.

•Petrol-Gel Lubricant or equivalent food grade grease for coating deliming port threads.

NOTE: Deliming solution may cause the surface of aluminum measuring tools to tarnish or etch.

4.Once the proper slot alignment has been set, hold the striker close to its base using an open end wrench, add Loctite to the threads, then tighten the striker nut. Be careful not to damage the striker slot when tightening or door may not latch properly. Do not over tighten as the striker will begin to turn and change alignment.

5.If door does not open easily, add shims as necessary between striker and cabinet front.

6.Repeat steps 2 thru 4.

DELIMING THE GENERATOR

WARNING: READ AND FOLLOW THE INSTRUC- TIONS ON THE DELIMING MATERIAL PACKAGE. AVOID CONTACT WITH SKIN AND EYES. WEAR PLASTIC OR RUBBER GLOVES AND SAFETY GOGGLES WHEN HANDLING. WASH THOR- OUGHLYAFTER HANDLING. IF DELIMING SOLU- TION COMES IN CONTACT WITH THE SKIN OR EYES, RINSE THOROUGHLY WITH CLEAN WATER.

WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE STEAMER. THE COOKING COMPARTMENT CONTAINS LIVE STEAM. STAY CLEAR WHEN OPENING DOOR.

Items Required (not provided)

•Deliming material.

•Funnel.

•Plastic or rubber gloves.

C24GA (Automatic Drain)

11 US GAL Capacity Steam Generator.

NOTE: This procedure is not intended to take the place of a water treatment program.

1.Turn power switch off. Wait 5 minutes for steam generator to completely drain and the drain valve to close.

2.Turn cooking timers to off.

3.Prepare deliming solution according to the instructions on the deliming material package. Follow all manufacturers’ instructions.

4.Remove delime port cap on top of unit and insert funnel into delime port.

5.Pour deliming solution into the steam generator slowly to avoid spillage.

6.Remove funnel from delime port then rinse port with clean water.

7.Lightly coat delime port threads with Petrol-Gel then install delime port cap. Cap must be installed and tightened securely at all times.

8.Turn power switch on. When ready light comes on, allow steamer to remain on for 40 minutes.

9.After 20 minutes, turn cooking timers on for 1 minute to delime the steam tubes and nozzles.

F35425 (February 2006)

 

Page 20 of 40

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Convection SteamersTable of Contents Low Level Cut-Off & Differential Control Installation Operation Cleaning Specifications GeneralIntroduction ToolsRemoval and Replacement of Parts Covers and PanelsDoor Assembly Cooking Compartment DoorCabinet Base Left Side Panel Cabinet Base Rear PanelDoor Gasket Door HandleDoor Latch Assembly Compartment ControlsGAS Combination Control Valve Generator AssemblyMain Burner Covers and Panels Fill and Cold Water Solenoid Valves PILOT/SPARK Probe Flame Sensor Service Procedures and Adjustments Blower AIR Pressure Adjustment AIR Pressure SwitchPilot Burner Adjustment Operating Pressure Switch Thumb Wheel Adjustment Inlet Water/Steam Strainer Automatic Ignition Systems Spark Ignition Control TestManifold Pressure Adjustment Ignition TestControls Latch AdjustmentCooking Compartment Striker Adjustment Deliming the GeneratorItems Required not provided C24GA Automatic Drain US GAL Capacity Steam GeneratorGeneral Cooking Cycle TestProbe Inspection Electrical Operation Water Level ControlsSequence of Operation Low Level Cut-Off and Differential ControlC24GA Series Convection Steamers Electrical Operation Compartment control Units after Dec Schematic Diagrams Generator Schematic DiagramSchematic Diagram Compartment Controls Standard Schematic Diagram Compartment Controls Constant Steam Component Location Cabinet Base Generator Component Function Cabinet Base Generator Blower Air Pressure Switch Super Heater AssemblyDrain Valve Timer Hold ThermostatComponent Location Cooking Compartment Component Function Cooking Compartment Troubleshooting Troubleshooting Sequence of Operation Step Function DescriptionTroubleshooting Chart Symptom Possible CausesSymptom Possible Causes Symptom Possible Causes Condensed Spare Parts List F35425 February

C24GA6 ML-136021, C24GA10 ML-136022, C24GA6, C24GA10, ML-136021, ML-136022 specifications

The Vulcan-Hart C24GA series is renowned in the commercial kitchen industry for its high-quality performance and efficient cooking capabilities. This series includes models C24GA6 and C24GA10, which are designed with versatility and reliability at their core. These models cater to a wide range of culinary demands, ensuring that chefs can prepare a variety of dishes with ease.

The C24GA6 features six powerful burners, providing ample cooking space and heat output for busy kitchens. Its robust construction ensures durability, while an easy-to-clean stainless steel exterior makes maintenance hassle-free. The burners are designed for quick ignition, and the adjustable flame control allows for precise temperature adjustments, ideal for simmering sauces or achieving the perfect sear.

On the other hand, the C24GA10 model is equipped with ten burners, making it suitable for larger establishments that require additional cooking power. Similar to the C24GA6, it incorporates seamless stainless steel components and a design that meets the rigorous demands of a professional kitchen. Both models boast a high BTU output, ensuring that meals are prepared quickly and efficiently, which is essential during peak hours.

The C24GA series also integrates advanced technologies that enhance its functionality. The burners utilize a standing pilot ignition system, ensuring a reliable start-up every time. This technology minimizes downtime and allows chefs to focus on cooking rather than troubleshooting equipment.

In addition to the C24GA series, Vulcan-Hart offers the ML-136021 and ML-136022 models, which complement the cooking arsenal in any kitchen. These models are expertly designed to provide the same level of reliability and performance. They follow the same principles of durability and ease of maintenance that Vulcan-Hart is known for.

The ML-136021 and ML-136022 models feature streamlined designs that fit seamlessly into any workspace. With efficient heat distribution and user-friendly controls, these models are perfect for both experienced chefs and culinary students alike.

Together, the Vulcan-Hart C24GA6, C24GA10, ML-136021, and ML-136022 models represent a comprehensive cooking solution that meets the varied needs of commercial kitchens. With their powerful burners, durable construction, and advanced technologies, these units ensure top-notch performance and efficiency for all cooking requirements.
Top Page Image Contents