Sterling A0567659 manual Mix Chamber, Opti-Mixer, HC Mixer, Operator Control Panel

Page 19

1-11-5 Mix Chamber

All of the Sterling batch blenders are equipped with an integral mix chamber. The mix chamber holds multiple batches of material so any variations in a batch are averaged over time.

1-11-5-1 Opti-Mixer™

The Opti-mixer™ is designed to provide bi-directional mixing action and can be easily taken apart for cleaning. This design is standard on all SGB blenders.

1-11-5-2 “HC” Mixer

The “HC” Mixer features an open wheel design and is best used for multiple regrind materials and rigid pellets. It is optional on all SGB models.

WARNING!

Never reach into the mix section of the blender without disconnecting the power or air supply.

Serious injury can result from getting your hand caught in the rotating mixer!

1-11-6 Operator Control Panel

The operator control panel includes a 8 foot (2.4 m) cable and can be remote mounted (not recommended) adjacent to the blender. The panel can be unplugged and removed if necessary.

The controller includes an embedded computer. This design provides excellent blender performance along with an easily replaceable control panel in the unlikely failure of any computer or electronic part.

The display menu format is very simple. After installation and setup, simply enter in the recipe and start the blender.

If it is desired to have a local display and control of the blender closer to a remote operator station, an optional RS422 remote control panel (RCP) is available.

SGB Batch Blender with Mitsubishi Controller

Page 19 of 118

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Model # Serial # Table of Contents Maintenance Wear Safety Glasses and Work Gloves Safety ConsiderationsSterling SGB-E Series Blenders Annex B Information Equipment Function AccessoriesCustomer Service IntroductionSGB Blenders Necessary DocumentsSystem Capabilities Equipment Covered by this ManualSGB Batch Blender with Mitsubishi Controller Three 3 types of recipe entry procedures available SGB -E Series Specifications SGB Model SGB Blender System Component DescriptionMaterial Supply Hoppers Typical Material Supply HoppersSlide Gate Metering Assemblies SGB Batch Blender with Mitsubishi Controller Locating Tabs Weigh HopperWeigh Hopper Discharge Valve Operator Control Panel Mix ChamberOpti-Mixer HC MixerTypical Setup Screens Typical Operator Screens SGB Batch Blender with Mitsubishi Controller Pneumatic Slide Gate Below Mixer Optional Mixer Slide Gate Switch PositionsWork Rules SafetySafety Considerations Mechanical InstallationTools and Equipment Needed General Responsibility Reporting a Safety DefectRemember Operator ResponsibilityMaintenance Responsibility Description and Objectives SafetySafety Device Lock-Outs Safety Circuit StandardsFail Safe Operation Line Cord Plug Lock-Outs, Plugs, and Other Safety DevicesElectric Safety Interlock Switch All Models Unpacking and Inspection Shipping InformationEvent of Shipping Damages Parcel Post Shipment United Parcel Service ShipmentIf the Shipment is Not Complete Returns If the Shipment is Not CorrectSite Requirements Installation & SetupMounting Configuration Chapter Description and ObjectivesSGB Batch Blender with Mitsubishi Controller Mezzanine Mount Floor Mount Central Blender Lifting Lug Installation OverviewElectrical Installation Blender Set-up Pneumatic InstallationLoad Cell Adjustment Weigh Hopper InstallationLoad Cell Mechanical Stop Adjustment Final Setup SGB Batch Blender with Mitsubishi Controller Operation Quick Start ProcedureSGB Blender Sequence of Operation Quick Set Recipe Entry FormatsMost common in injection molding Often used in Compounding Applications Percentage ModeParts Mode Most common in extrusion and blow moldingPreset Part Calculated Weight Ratio Control Example of a 5-component Blend in Parts ModeSwitching Modes Recipe Page Start SGB Series Control System Menu StructureBlender Calibration Additional settings that usually do not have to be changedSGB Batch Blender with Mitsubishi Controller Setting up a recipe Controller Mode SetupInventory Shutdown Color Change Blender where there are moving parts Please refer to the SGB menu structure in Section Additional Operation Features Display Description LCDMenu tree Re-Mix Timer Mix TimerMixer Options Weigh Hopper Dump Delay TimeWeigh Hopper Dump Time Weigh Hopper Dump Cycle Feeder Alarm Setup & FlagsMAX Hopper Weight Exceeded Calibration Error Additional Control Functions Feeder Clean OutGeneral Operation SGB Batch Blender with Mitsubishi Controller Standard Run Time Displays Recipe Menu Quick Set Menu Current Recipe MenuRecipe Format Menu SGB Batch Blender with Mitsubishi Controller SGB Batch Blender with Mitsubishi Controller Inventory Shutdown Batch Size MenuTypical Batch Size Recipe Book Storage Menus Save Running Recipe to the Book Load a Saved Recipe from the Book Display Recipe ContentsErase Recipe or Entire Book Setting Date & Time Controller Features Display Time and DateStroke Limiter Stroke Limiters for Metering GatesMaintaining Blenders MaintenanceController Setup SGB Series Blender Menu Structure Units SetupWeekly Typical Model SGB Assembly OverviewMechanical DailyElectrical Input Signals to Programmable ControllerOutput Signals from Programmable Controller Pneumatic System Maintenance Description and Objectives 7TroubleshootingProblem Possible solution Done in the field, the controller warranty will be voided Problem Possible solution Blender Options Model SGB-900 Spare Parts ListSpare Parts Model SGB-450Overview Component Identification and LocationSGB Batch Blender with Mitsubishi Controller SGB Batch Blender with Mitsubishi Controller Typical Mixer Frame Typical Opti-Mixer Frame Assembly Typical Supply Hopper Typical Weigh Hopper Typical SGB-450 Series Hopper Assembly DetailTypical Weigh Hopper & Load Cell Detail Parts Department Technical AssistanceReturned Material Policy Warranty ReturnsCredit Returns Warranty SGB Blender Safety Tags Safety Tag InformationButton Power OnPower Off Pushbutton and Touchscreen TagsLocated on back of mixing chamber Blender Identification Serial Number TagModel Number SGB-900 Max Blend Capacity 318 KG/HR Programmable Settings Addendum Service Supervisor Information12Appendix Advanced Weight Factory Setup MenuAvailable Selections SGB Batch Blender with Mitsubishi Controller 107 Feed Calibration Feeder Setup Customer Setup MenuSelect a feeder by touching the Select Feeder Programmable Features Service Notes Default Values factory defaults shown PasswordsAlarm Setup SGB Blender Configuration Parameters Cont’dFeed CAL Options SGB Batch Blender with Mitsubishi Controller 115 116 SGB Batch Blender with Mitsubishi Controller SGB Batch Blender with Mitsubishi Controller 117 118 SGB Batch Blender with Mitsubishi Controller

A0567659 specifications

Sterling A0567659 is a premium-grade product designed to meet the needs of various industrial applications. As an exceptional piece of equipment, it reflects advancements in engineering and technology, ensuring high performance and reliability.

One of the key features of the Sterling A0567659 is its robust construction. Built using high-quality materials, it withstands harsh working conditions, making it suitable for demanding environments. Its durable design minimizes wear and tear, leading to a longer lifespan and reduced maintenance costs. This resilience is complemented by sophisticated corrosion resistance, ensuring that the product remains functional even in challenging climates.

Another notable characteristic of the Sterling A0567659 is its advanced technological integration. The product comes equipped with cutting-edge automation technologies that enhance its operational efficiency. These advancements enable streamlined processes, reducing the room for error and increasing overall productivity. Users benefit from intuitive interfaces that facilitate easy monitoring and control, allowing for quick adjustments and data analysis in real-time.

The Sterling A0567659 also prioritizes energy efficiency. With rising energy costs and increasing environmental concerns, this product has been designed to consume less power without compromising performance. Its innovative design incorporates features such as optimized airflow and heat management, resulting in lower operational costs and a reduced carbon footprint.

Safety is another critical aspect of the Sterling A0567659. Equipped with comprehensive safety features, including emergency shut-off systems and user-friendly operational protocols, it ensures that operators can work confidently and without risk. These safety measures comply with international standards, making it a reliable choice for businesses prioritizing workplace safety.

In terms of versatility, the Sterling A0567659 is suitable for a wide range of applications across multiple industries. From automotive to manufacturing and beyond, it adapts well to various operational needs. Its customizable options mean that businesses can tailor the product to their specific requirements, ultimately enhancing performance and optimizing workflow.

In summary, the Sterling A0567659 is a formidable asset for any industrial operation, merging durability, advanced technology, energy efficiency, and safety features into one cohesive unit. Its versatility and reliability make it an excellent investment for companies looking to enhance their productivity and maintain competitiveness in today's fast-paced market.
Top Page Image Contents