![](/images/new-backgrounds/1075456/7545623x1.webp)
Instructions
Using the clock, timer and control lockout.
Safety
Make sure the clock is set to the correct time of day.
To Set the Clock
The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or
Press the CLOCK pad.
Press the number pads.
Press the START pad.
Operating Instructions
The timer is a minute timer only.
The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.
To Set the Timer
Press the KITCHEN TIMER ON/OFF pad.
Press the number pads until the amount of time you want shows in the display. For example, to set 2 hours and 45 minutes, press 2, 4 and 5 in that order. If you make a mistake, press the KITCHEN TIMER ON/OFF pad and begin again.
Press the START pad.
When the timer reaches :00, the control will beep 3 times followed by one beep every
6 seconds until the KITCHEN TIMER ON/OFF pad is pressed.
The
Troubleshooting Tips Care and Cleaning
After pressing the START pad, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed. Seconds will not be shown in the display until the last minute is counting down.
To Reset the Timer
If the display is still showing the time | If the remaining time is not in the display |
remaining, you may change it by pressing | (clock, delay start or cooking time are in |
the KITCHEN TIMER ON/OFF pad, then | the display), recall the remaining time by |
press the number pads until the time | pressing the KITCHEN TIMER ON/OFF pad |
you want appears in the display. | and then pressing the number pads to |
| enter the new time you want. |
To Cancel the Timer
Press KITCHEN TIMER ON/OFF pad twice.
Consumer Support
Control Lockout
Your control will allow you to lock out the touch pads so they cannot be activated when pressed.
NOTE: On double oven models, this activates this feature for both ovens.
To lock/unlock the controls:
Press the 9 and 0 pads at the same time for 3 seconds, until the display shows LOC ON.
To unlock the control, press the 9 and 0 pads at the same time for 3
12seconds, until the display shows
LOC OFF.
When this feature is on and the touch pads are pressed, the control will beep and the display will show LOC ON.
NOTES:
■The control lockout mode affects all touch pads. No touch pads will work when this feature is activated.
■The adjustment will be retained in memory after a power failure.