Operating Instructions Safety Instructions

Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California

to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Consumer Support Troubleshooting Tips Care and Cleaning

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

■Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

■Before performing any service, disconnect the oven power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■Do not allow anyone to climb, stand or hang on the door. They could damage the oven, or cause severe personal injury.

■Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit, stand or hang on the oven door.

■Never leave the oven door open when you are not watching the oven.

■Always keep combustible wall covering, curtains or drapes a safe distance from your oven.

■Always keep dish towels, dish cloths, pot holders and other linens a safe distance from your oven.

■Always keep wooden and plastic utensils and canned food a safe distance away from your oven.

■Teach children not to play with the controls or any other part of the oven.

■Large scratches or impacts to glass doors can lead to broken or shattered glass.

JT912, JT952 specifications

The GE JT912 and JT952 are advanced turbofan engines designed to provide optimal performance and efficiency for a variety of commercial and military aircraft. Both engines belong to the GE family of engines, which is known for its commitment to innovation and reliability in aviation technology.

The GE JT912 is a high-bypass turbofan engine that features a two-shaft configuration aimed at maximizing performance and efficiency. It is primarily designed for regional and business jets, offering a thrust range suitable for various applications. One of the standout features of the JT912 is its efficient fan design, which incorporates composite fan blades and advanced aerodynamic shaping. This design not only enhances fuel efficiency but also reduces noise, aligning with the industry's growing focus on eco-friendliness.

In terms of materials, the JT912 employs advanced nickel and titanium alloys in its construction, which contribute to enhanced durability and performance under high temperatures. The engine is also equipped with state-of-the-art digital engine control technology, allowing for better monitoring and optimization of engine performance throughout the flight profile. The integration of this technology results in a reduced maintenance burden and extended time between overhauls, attributes that are crucial for operators looking to manage costs effectively.

On the other hand, the GE JT952 engine is tailored for larger aircraft, offering higher thrust capabilities. It features similar technological advancements, including an advanced high-pressure compressor that optimizes the air intake and enhances overall engine performance. The JT952 is designed with a focus on reliability and efficiency, making it suitable for both commercial aviation and military applications.

An important feature of the JT952 is its modular design, which simplifies maintenance and repair processes. This modularity allows for quicker turnaround times during servicing and reduces overall downtime for operators. Additionally, the engine is designed to meet stringent environmental regulations, minimizing emissions and noise levels.

In summary, both the GE JT912 and JT952 engines represent the forefront of turbofan technology, combining advanced materials, innovative design features, and state-of-the-art control systems. Their focus on efficiency, reliability, and reduced environmental impact makes them valuable assets for modern aviation, catering to a wide range of operational needs. These engines exemplify GE's dedication to pushing the boundaries of aerospace engineering and supporting the future of flight.