Before You Call For Service…

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Troubleshooting Tips

Save time and money! Review the charts on the following pages first and you may not need to call for service.

Problem	Possible Causes	What To Do

Control signals after	You forgot to enter a bake	• Press the BAKE pad and desired temperature or the
entering cooking time	temperature or cleaning	SELF CLEAN STD/LOW pad and desired clean time.
or delay start	time.

Food does not bake	Oven controls improperly set.	• See the Using the oven section.
or roast properly
or roast properly	Shelf position is incorrect	• See the Using the oven section.
	Shelf position is incorrect	• See the Using the oven section.
	or the shelf is not level.

	Incorrect cookware or	• See the Using the oven section.
	cookware of improper size
	being used.

	Oven floor not in place.	• Replace the oven floor.

	Oven thermostat needs	• See the Adjust the oven thermostat—Do it yourself!
	adjustment.	section.

Food does not	Oven controls improperly set.	• Make sure you press the BROIL HI/LO pad.
broil properly
broil properly	Improper shelf position	• See the Broiling Guide.
	Improper shelf position	• See the Broiling Guide.
	being used.

	Food being cooked	• Use the broiling pan and grid that came with your oven.
	in a hot pan.	Make sure it is cool.

	Cookware not suited	• Use the broiling pan and grid that came with your oven.
	for broiling.

	The probe is plugged into the	• Unplug and remove the probe from the oven.
	outlet in the oven.

	Aluminum foil used on the	• See the Using the oven section.
	broiling pan and grid has
	not been fitted properly and
	slit as recommended.

	In some areas the power	• Preheat the broil element for 10 minutes.
	(voltage) may be low.	• Broil for the longest period of time recommended in
		• Broil for the longest period of time recommended in
		the Broiling Guide.

Clock and timer	A fuse in your home may be	• Replace the fuse or reset the circuit breaker.
do not work	blown or the circuit breaker
	tripped.

	Oven controls improperly set.	• See the Using the clock, timer and control lockout
		section.

Oven light does	Light bulb is loose or defective.	• Tighten or replace the bulb.
not work
not work	Pad operating light is broken.	• Call for service.
	Pad operating light is broken.	• Call for service.

JT912, JT952 specifications

The GE JT912 and JT952 are advanced turbofan engines designed to provide optimal performance and efficiency for a variety of commercial and military aircraft. Both engines belong to the GE family of engines, which is known for its commitment to innovation and reliability in aviation technology.

The GE JT912 is a high-bypass turbofan engine that features a two-shaft configuration aimed at maximizing performance and efficiency. It is primarily designed for regional and business jets, offering a thrust range suitable for various applications. One of the standout features of the JT912 is its efficient fan design, which incorporates composite fan blades and advanced aerodynamic shaping. This design not only enhances fuel efficiency but also reduces noise, aligning with the industry's growing focus on eco-friendliness.

In terms of materials, the JT912 employs advanced nickel and titanium alloys in its construction, which contribute to enhanced durability and performance under high temperatures. The engine is also equipped with state-of-the-art digital engine control technology, allowing for better monitoring and optimization of engine performance throughout the flight profile. The integration of this technology results in a reduced maintenance burden and extended time between overhauls, attributes that are crucial for operators looking to manage costs effectively.

On the other hand, the GE JT952 engine is tailored for larger aircraft, offering higher thrust capabilities. It features similar technological advancements, including an advanced high-pressure compressor that optimizes the air intake and enhances overall engine performance. The JT952 is designed with a focus on reliability and efficiency, making it suitable for both commercial aviation and military applications.

An important feature of the JT952 is its modular design, which simplifies maintenance and repair processes. This modularity allows for quicker turnaround times during servicing and reduces overall downtime for operators. Additionally, the engine is designed to meet stringent environmental regulations, minimizing emissions and noise levels.

In summary, both the GE JT912 and JT952 engines represent the forefront of turbofan technology, combining advanced materials, innovative design features, and state-of-the-art control systems. Their focus on efficiency, reliability, and reduced environmental impact makes them valuable assets for modern aviation, catering to a wide range of operational needs. These engines exemplify GE's dedication to pushing the boundaries of aerospace engineering and supporting the future of flight.