GE JT912, JT952 Using the self-cleaning oven, Operating Instructions Safety, Before a Clean Cycle

Page 20

Instructions

Using the self-cleaning oven.

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

Operating Instructions Safety

Wipe up heavy soil on the oven bottom. (appearance may vary)

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during

the first self-clean cycle.

Remove the broiler pan, broiler grid, probe, all cookware and any aluminum foil from the oven.

The oven shelves can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Do not use abrasives or oven cleaners. Clean the top, sides and outside of the oven door with soap and water.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven. Move birds to another well-ventilated room.

■On double oven models, you can set a clean cycle in both ovens at the same time. The last oven set will automatically delay its start until the end of the first oven’s clean cycle.

■On double oven models, you can use timed baking in one oven and self-clean the other at the same time.

Consumer Support Troubleshooting Tips Care and Cleaning

How to Set the Oven for Cleaning

Press the SELF CLEAN STD/LOW pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven.

If a time other than 4 hours or

3 hours is needed, use the number pads and enter the desired clean time.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Press the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.

When the LOCKED light goes off, you will be able to open the door.

■The words LOCKED will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, press the

CLEAR/OFF pad. When the LOCKED light goes off indicating the oven has cooled below the locking temperature, you will be able to open the door.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Built-In Oven Write the model and serial numbers here Model # Serial #Operating Instructions Safety Instructions Consumer Support Troubleshooting Tips Care and CleaningSafety Instructions Cleaning Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Care Using the oven controls Troubleshooting Tips Consumer SupportSpecial features of your oven control Safety InstructionsTroubleshooting Tips Care and Cleaning Consumer SupportSafety Tone VolumeInstructions Operating Tones at the End of a Timed CycleInstructions Cook and HoldUsing the Sabbath Feature Cleaning TroubleshootingTips Designed for use on the Jewish Sabbath and HolidaysUsing the oven Care and CleaningTroubleshooting Tips InstructionsHow to Set the Oven for Broiling SafetyInstructions Operating Broiling GuideUsing the clock, timer and control lockout Safety Instructions How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop Operating Instructions CareUsing the probe Instructions SafetyCare and Cleaning Operating Consumer Support Troubleshooting TipsUsing the convection oven SafetyConvection Bake Multi-Shelf Convection BakingCare and Cleaning Operating How to Set the Oven for Convection Baking or RoastingConvection Roast Paper and PlasticTroubleshooting Tips Consumer Support Instructions Operating Instructions Care and CleaningConvection Roasting Guide Press the Convection Roast padUsing the timed features for convection cooking Consumer Support Troubleshooting TipsPress the Convection Bake or Convection Roast pad Length of cooking time you have setAdjust the oven thermostat-Do it yourself Cleaning Troubleshooting Tips Consumer SupportTo Adjust the Thermostat Type of margarine will affect baking performanceUsing the self-cleaning oven Operating Instructions SafetyBefore a Clean Cycle How to Set the Oven for CleaningHow to Delay the Start of Cleaning Cleaning Troubleshooting Tips Consumer SupportAfter a Clean Cycle Care and cleaning of the oven Instructions SafetyHow to Remove Packaging Tape Oven Light BulbCare and Cleaning Troubleshooting Tips Cleaning the Oven DoorLift-Off Oven Door Removable Oven FloorCare and Cleaning Operating InstructionsControl Panel Stainless Steel Surfaces on some modelsBefore You Call For Service… Problem Possible Causes What To DoSee the Using the self-cleaning oven section During clean cycleNot open after a Clean cycle Is on when you wantSee the Special features of your oven control section Power outageA number Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Built-In Electric Oven Warranty Safety Instructions OperatingInstructions Care GE Will ReplaceSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

JT912, JT952 specifications

The GE JT912 and JT952 are advanced turbofan engines designed to provide optimal performance and efficiency for a variety of commercial and military aircraft. Both engines belong to the GE family of engines, which is known for its commitment to innovation and reliability in aviation technology.

The GE JT912 is a high-bypass turbofan engine that features a two-shaft configuration aimed at maximizing performance and efficiency. It is primarily designed for regional and business jets, offering a thrust range suitable for various applications. One of the standout features of the JT912 is its efficient fan design, which incorporates composite fan blades and advanced aerodynamic shaping. This design not only enhances fuel efficiency but also reduces noise, aligning with the industry's growing focus on eco-friendliness.

In terms of materials, the JT912 employs advanced nickel and titanium alloys in its construction, which contribute to enhanced durability and performance under high temperatures. The engine is also equipped with state-of-the-art digital engine control technology, allowing for better monitoring and optimization of engine performance throughout the flight profile. The integration of this technology results in a reduced maintenance burden and extended time between overhauls, attributes that are crucial for operators looking to manage costs effectively.

On the other hand, the GE JT952 engine is tailored for larger aircraft, offering higher thrust capabilities. It features similar technological advancements, including an advanced high-pressure compressor that optimizes the air intake and enhances overall engine performance. The JT952 is designed with a focus on reliability and efficiency, making it suitable for both commercial aviation and military applications.

An important feature of the JT952 is its modular design, which simplifies maintenance and repair processes. This modularity allows for quicker turnaround times during servicing and reduces overall downtime for operators. Additionally, the engine is designed to meet stringent environmental regulations, minimizing emissions and noise levels.

In summary, both the GE JT912 and JT952 engines represent the forefront of turbofan technology, combining advanced materials, innovative design features, and state-of-the-art control systems. Their focus on efficiency, reliability, and reduced environmental impact makes them valuable assets for modern aviation, catering to a wide range of operational needs. These engines exemplify GE's dedication to pushing the boundaries of aerospace engineering and supporting the future of flight.
Top Page Image Contents