GE JP389, JP385, JP387 Surface Cooking With Infinite Heat Controls, How to Set the Controls

CONTROLS

Surface Cooking With Infinite Heat Controls

At both OFF and HI the control “clicks” into position. You may hear slight “clicking” sounds during cooking, indicating the control is keeping the unit at the heat level you set.

Switching heats to a higher setting always shows a quicker change than switching to a lower setting.

How to Set the Controls

Push the knob in	Be sure you turn the control to OFF when you
and turn in either	finish cooking.
direction to the heat	The surface unit indicator light will glow when
setting desired.
	ANY heat on any module surface unit is on.

Cooktop Comparison

Cooking Guide for Using Heat Settings

HI—Used to begin cooking or to bring water to a boil. Reduce heat setting after water boils.

Medium High—(Setting halfway between HI and MED.) Maintains a fast boil on large amounts of food.

MED—Sauté and brown; keeps food at a medium boil or simmer.

Medium Low—(Setting halfway between MED and LO.) Cook after starting at HI; cooks with little water in covered pan.

LO—Used for long, slow cooking (simmering) to tenderize and develop flavors. Use this setting to melt butter and chocolate or to keep foods warm.

NOTE: The surface unit indicator light may glow between LO and OFF, but there is no power

to the surface units.

Do not be alarmed by the blower.

It will automatically come on when the grill or griddle is used.

Medium	Medium
Low	High

Controls

9