GE 165D4700P382 About the dishwasher control panel, Control Settings, Instructions, Safety

Page 4

Instructions

About the dishwasher control panel.

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.

Safety

1

3

6

 

 

5

4

2

Operating Instructions

Troubleshooting Tips

Consumer Support

Control Settings

1

Status Indicator Lights

 

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a malfunction (see

 

 

page 6). The lights will come ON indicating the sequence of operation the dishwasher is in.

 

 

 

 

 

LOW DETERGENT Displayed when the SmartDispenseTM needs to be refilled with liquid or gel automatic dishwasher

(on some models)

detergent.

SENSING

Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water.

 

The dishwasher will adjust the selected cycle to achieve optimal performance.

 

 

WASHING

Displayed during prewash and main wash periods.

 

 

RINSING

Displayed during rinse periods.

 

 

DRYING

Displayed during HEATED DRY.

 

 

SANITIZED

Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.

 

 

CLEAN

Displayed when a wash cycle is complete.

2

Time Remaining Display (on some models)

 

During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining

 

 

time while the Sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit

 

customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts.

3

Selections

 

 

Press the pad for the desired wash cycle.

 

 

NOTE: All cycle times and water usage information contained in the following section are approximate values only.

 

Actual results will depend on several factors, including but not limited to, inlet temperature, household water pressure

 

and turbidity of the wash water.

 

The light above or next to the selected pad will be ON to indicate which WASH CYCLE has been selected.

 

 

 

 

 

 

ANTI-BACTERIA

Heavy 8.8 gallons (33.3 litres), 105 minutes

 

 

 

Medium 7.5 gallons (28.4 litres), 95 minutes

 

 

 

Light 6.3 gallons (23.8 litres), 85 minutes

 

 

 

This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle

 

 

 

length will vary depending on the temperature of your inlet water.

 

 

 

NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is

 

 

 

interrupted during or after the main wash portion or if the incoming water temperature is so

 

 

 

low that adequate water heating cannot be achieved, the sanitizing conditions may not be

 

 

 

met. In these cases, the sanitized light will not illuminate at the end of the cycle.

 

 

 

NOTE: NSF-certified residential dishwashers are not intended for licensed food establishments.

 

 

 

 

 

 

COOKWARE

Heavy 10.0 gallons (37.9 litres), 80 minutes

 

 

(POTS & PANS)

Medium 8.8 gallons (33.3 litres), 70 minutes

 

 

 

Light 7.5 gallons (28.4 litres), 60 minutes

 

 

 

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This

 

 

 

cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.

 

 

 

 

 

 

NORMAL WASH

5.0–8.8 gallons (18.9–33.3 litres), 47–90 minutes

 

 

 

This cycle is for medium/heavily soiled dishes and glassware.

Cycle time and water usage are approximate values. Results will depend on several factors, including but not limited to inlet temperature, household water pressure and amount of soil in the wash water.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Consumer Support . . . . .Back Cover Warranty Write the model and serial numbers here Model # Serial #Troubleshooting Tips Operating InstructionsConsumer Support On dishwashers with electronic controlsBefore You Throw Away Your Old Dishwasher Ge.comOperating Instructions Door latch keeperControl Settings SafetyTroubleshooting Tips Consumer Support About the dishwasher control panelSafety Instructions Enhancements/ExtrasOr HAND/GENTLE Or Rinse & HoldUsing the dishwasher Check the Water TemperatureFlashing display lights Use Jet-Dry or Cascade Crystal Clear Rinse AgentManual Detergent Dispenser Filling Manual Detergent DispenserNumber GrainsSmartDispenseTM Detergent Dispenser on some models Filling DispenserSet Control to Calibration Mode Determine the Hardness of Your Tap WaterControl Calibration Water hardness test strip indicationLoading the dishwasher racks Upper RackLower Rack Silverware BasketLoading place settings… Cleaning the Exterior Door PanelCaring for the dishwasher Tips Consumer SupportBefore you call for service… Cleaning the Control PanelStainless Steel Interior-Tub and Inner Door Protect Against FreezingSafety Instructions Operating Instructions Problem Possible Causes What To DoMake sure inlet water temperature is at least 120F Is tripped Circuit Power is turned offDishes don’t dry Select Heated DRYFor The Period GE Will Replace GE Dishwasher WarrantyWarrantor General Electric Company. Louisville, KY Consumer Support Lave-vaisselle Instructions de Fonctionnement Conseils de dépannageAvant de jeter votre vieux lave-vaisselle Au consommateurElectromenagersge.ca Le panneau de contrôle du lave-vaisselle Réglage des contrôlesSécurité Soutien au consommateur Conseils de dépannageInstructions de sécurité Conseils de dépannage Soutien au consommateurOptions Rinse and Hold rinçage et attenteVoyants lumineux clignotants Utilisation du lave-vaisselleVérifiez la température de l’eau Préparation de la vaisselle avant son chargementDistributeur manuel de détergent De sécuritéInstructions Remplissage du distributeur manuel de détergentDistributeur de détergent SmartDispense certains modèles Il sera éliminé au cours du prochain cycleRéglage des commandes pour le mode Étalonnage Commande d’étalonnageDétermination de la dureté de l’eau du robinet InstructionsChargement des paniers de votre lave-vaisselle SécuritédePanier supérieur Panier inférieurChargement des couverts… Soins de votre lave-vaisselleConseils De dépannage Soutien au consommateurAvant d’appeler le service de réparations… Nettoyer le panneau de commandeProtection contre le gel Est-ce que votre lave-vaisselle a un écart anti-retour?Problème Causes possibles Ce qu’il faut faire Commande a réagi Choisissez Heat DRYséchage chaudLavage à chaud ou Added Heat chaleur + Sani Wash désinfecter ou Cookware casserolesGarantie GE sur les lave-vaisselle Conseils dePour une période de Nous remplacerons Ce qui n’est pas couvert pour les clients au CanadaSoutien au consommateur Service de réparations Pièces et accessoiresStudio de conception réaliste Prolongation de garantie

165D4700P382 specifications

The GE 165D4700P382 is a highly regarded component within the realm of industrial and commercial applications, known for its robustness and reliability. This device serves as a vital part of various electrical systems, providing efficient performance and superior operation in challenging environments.

One of the main features of the GE 165D4700P382 is its advanced protection capabilities. It is designed to safeguard equipment from overloads, short circuits, and voltage spikes, thereby prolonging the life of connected machinery and reducing the likelihood of failures. This protective functionality is essential in environments where electrical disturbances can lead to significant downtime and costly repairs.

The GE 165D4700P382 incorporates cutting-edge technology that enhances its efficiency and versatility. This component is equipped with state-of-the-art microprocessor-based controls that allow for precise monitoring and management of the electrical system. These controls enable functionalities such as adjustable trip settings, remote monitoring, and integration into automated systems, making it an adaptable choice for contemporary industrial settings.

Another key characteristic of the GE 165D4700P382 is its robust construction. Built to withstand extreme temperatures and harsh environmental conditions, this component is rated for high performance even in the most demanding applications. Its housing is designed to resist dust, moisture, and other contaminants, ensuring reliable operation without the need for frequent maintenance.

The device's compact design facilitates easy integration into existing electrical systems, making installation straightforward and efficient. Furthermore, the GE 165D4700P382 offers various mounting options, allowing for flexibility in deployment depending on the specific requirements of the application.

In summary, the GE 165D4700P382 stands out due to its advanced protection features, high-performance microprocessor technology, robust construction, and user-friendly design. These characteristics make it an indispensable asset in industrial and commercial settings, ensuring optimal performance and reliability in electrical systems. As industries continue to evolve with increasing demands for efficiency and safety, the GE 165D4700P382 remains a trusted choice for professionals seeking quality and innovation in their electrical components.
Top Page Image Contents