Fisher & Paykel DD90SDF(H)TX2, DD90SDFTM2 manual 17a Earth the Panel 18a Attach Panel to Product

Page 19

INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - INSTALLING THE FRONT PANEL		19
17a EARTH THE PANEL	18a ATTACH PANEL TO PRODUCT

WARNING!

Electrical Shock Hazard

To earth the panel bracket, connect the earth wire from the product to one of the tabs. Any custom metal component (e.g. handle) that extends past the rubber seal must be earthed too.

Failure to follow these warnings may result in electrical shock, injury or fire.

	Important!
	Ensure the rubber seal
	between the drawer
2	and panel is kept in
	place.

1

2

When refitting the door pins, ensure they are orientated as shown.

Image 19

Contents Installation Instructions DD90SDFHTX2 DD90SDFTM2 Follow the Installation Sequence Relevant to Your Model2b Additional Safety and Warnings Integrated Models only 2a Safety and Warnings ALL ModelsOptional 3a Parts Supplied ALL ModelsAttached to product 3b Additional Parts Supplied with Integrated ModelsPlan Product DimensionsCabinetry dimensions mm Cabinetry DimensionsFront Panel Specifications Min mm ventilation gap Water Connection 7a Cavity PreparationShelf cutouts Left hand side Maximum Distance of Hoses & Cord from Chassis EdgePage 9a Attach Side Mounting Brackets NOW Choose Which Installation Method a or b12a Secure the Drawer 11a Pull Through Hoses & Move Into the Cavity10b Pull Through Hoses & Move Into the Cavity 9b Integrated Models with Remote NZ AU only13b Refit the Drawer Onto the Runners 11b Remove the Drawer 12b Secure the Drawer to the CabinetryX14 17a Earth the Panel 18a Attach Panel to Product Badge zone When refitting Adjust Panel Height to Align the Cabinetry Gaps To required height Connect Inlet Hose to Cold Water 24 Plug ProductTroubleshooting Final Checklist