|
| INTEGRATED MODELS WITH BADGE (GB IE) ONLY - INSTALLING THE FRONT PANEL & BADGE CONTROLS | 21 | |
|
| |||
|
| |||
19b REATTACH BADGE & EARTH THE PANEL | 20b ATTACH PANEL TO PRODUCT |
| ||
2 | 2 |
1 | Push the panel |
in then up to | |
| locate. |
WARNING! | 1 |
| |
WARNING! | 2 |
Electrical Shock Hazard | |
Electrical Shock Hazard | |
Conne the integrated b dge earth wire to one of | |
the two tabs provided on the panel bracket. |
|
To earth the panel bracket, connect the |
|
Connect the integrated badge earth wire to |
|
earth wire from the product to the other tab. |
|
one of the two tabs provided on the panel |
|
Failure to follow these warnings may result in |
|
electricalbracket.shock,Toinjuryearthorthefire. panel bracket, connect |
|
the earth wire from the product to the other |
|
tab. Any custom metal component (e.g. han- |
|
dle) that extends past the rubber seal must |
|
be earthed too. |
|
Failure to follow these warnings may result in electrical shock, injury or fire.
Important!
Ensure the rubber seal between the drawer and panel is kept in place.
When refitting the
door pins, ensure they are orientated as shown.