Fisher & Paykel DD90SDF(H)TX2 manual 11b Remove the Drawer 12b Secure the Drawer to the Cabinetry

11b REMOVE THE DRAWER

12b SECURE THE DRAWER TO THE CABINETRY 17

1	Product may
	move. Mark

chassis position on cavity

4

The product has three pairs of fixing points:

To prevent kinked hoses, we recommend rotating the drawer anti-clockwise and resting it on its side

after removal.

Ensure the sound insulation is repositioned correctly.

a pair of fixing holes either side on the bottom

1

2

		100	mm
Press the release tabs			5
in on either side and			5
push back to release	3
drawer from runners

Push drawer runners back in.

13b REFIT THE DRAWER ONTO THE RUNNERS

(use 38 mm fixing screws & washers)

2

two pairs of formed

2brackets on either side of the chassis

(use 16 mm screws)

14b INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY -

SECURE THE EXTERNAL VENT

			the		release		tabs
						mm
Pull		forward		100			Ensure the drawer is
			sides
on	both
							now rotated

clockwise back.

5 4

3

Before refitting the drawer, ensure the hoses are not twisted and the latches at the rear of each drawer runner are facing forward.

1

2

Ensure the release tabs on	1
both sides are reset fully.

2

After routing the vent hose through and out the hole cutout, attach and secure the vent by tightening the four screws provided.

Airflow