STEP 2: CABINET PREPARATION
GAS AND ELECTRIC SUPPLY ZONES:
FIG. 3a
Gas & Electrical Supply Zone for PRG304, PRG36 & PRG48
Typical placement shown. | ||
Other placement of Gas | ||
120 VAC | ||
| ||
Supply and Electrical | Receptacle | |
| ||
Receptacle within the |
| |
Electrical and Gas Supply |
| |
Zone is acceptable. |
| |
NOTE: |
| |
A Manual Gas |
| |
| ||
(not shown) must |
| |
be easily accessible |
| |
through an adjacent | 1 3/4" Maximum | |
cabinet without moving | ||
Protrusion from Wall | ||
the range. | ||
for Gas Supply | ||
|
5/8" Flex Line to | The |
Appliance | with a power supply cord with a |
| |
| grounding plug. IT MUST BE PLUGGED |
Gas & Electrical INTO A MATING,
1/2" N P T NECTED TO A CORRECTLY POLARIZED AND GROUNDED 120 VAC CIRCUIT. (See STEP 6.)
The range must beconnected only to the type of gas for which it is certified.
If the range is to be connected to propane gas, ensure that the propane gas supply tank is equipped with its own high pressure regulator in addition to the pressure regulator supplied with the range. (See STEP 5.)
FIG 3b Gas & Electrical Supply Zone for PRDS304 Dual-Fuel Ranges
Typical placement shown. Other placement of Gas Supply and Electrical Receptacle within the Electrical and Gas Supply Zone is acceptable.
NOTE:
A Manual Gas
through an | 2" Maximum Protru |
adjacent cabinet without sion from Wall for Gas
movingSupply the range.
5/8" Flex Line to Appliance
1/2" N.P.T.
240 VAC Receptacle
(Shown) or Junction
Box
Gas &
Electrical •^Supply Zone
The
The range must be connected only to the type of gas for which it is certified. If the range is to be connected to propane gas, ensure that the propane gas supply tank is equipped with its own high pressure regulator in addition to the pressure regulator supplied with the range. (See STEP 5.)
FIG. 3c Gas & Electrical Supply Zone for PRDS36 and PRDS 48 Dual-Fuel Ranges
Typical placement shown. Other placement of Gas Supply and Electrical Receptacle within the Electrical and Gas Supply Zone is acceptable.
NOTE:
A Manual Gas
through an | 2" Maximum |
adjacent cabinet without | Protrusion from Wall |
moving | for Gas Supply |
the range. |
|
Model | B |
PRDS36 7"
PRDS48 12" 16"
5/8" Flex Line to Appliance
240 VAC Receptacle
(Shown) or Junction
Box Electrical
Supply Zone
The
The range must be connected only to the type of gas for which it is certified. If the range is to be connected to propane gas, ensure that the propane gas supply tank is equipped with its own high pressure regulator in addition to the pressure regulator supplied with the range. (See STEP 5.)
Page 6